Forschung

 Querschnittsbereiche

 Lehre

 Praktikantenamt

 Fastlinks

 

 

 

 

 

 

 

 

 


 

Tagungs-/Konferenzbeiträge

2017

  • Böhler, P., Dittmann, J., Michaelis, D., Middendorf, P. and Liebold, C.
    Manufacturing Simulation as Part of the Digital Prototype
    11th European LS-DYNA Conference 2017, Salzburg, Austria, May 2017

  • Poppe, C., Fial, J., Kräger, L., Carosella, S., Zimmerling, C., Albrecht, F., Draskovic, M., Engelfried, M., Middendorf, P. and Henning, F.
    Zeit- und kosteneffiziente Prozess- und Produktentwicklung für den Hochleistungs-Faserverbundleichtbau mittels Nasspresstechnologie
    4. Technologietag Hybrider Leichtbau, Stuttgart, May 2017

  • Schrick, B. and Carosella, S.
    Anlagentechnik für Maßgeschneiderte Preform Konstruktion und Produktion
    4. Technologietag Hybrider Leichtbau, Stuttgart, May 2017

  • Draskovic, M., Pickett, A. and Middendorf, P.
    Influence of Ply Waviness on the Residual Strength After Fatigue in GFRP - Comparison of Localized and Uniform Defects
    8th International Conference on Composites Testing and Model Identification, Leuven, Belgium, Apr 2017

  • Engelfried, M., Fial, J., Tartler, M., Böhler, P., Hägele, D. and Middendorf, P.
    A Mesoscopic Approach for Draping Simulation of Preforms Manufactured by Direct Fibre Placement
    20th International ESAFORM Conference on Material Forming, Dublin, Ireland, Apr 2017

  • Facciotto, S., Dittmann, J., Pickett, A. and Middendorf, P.
    Characterization and Modelling of Local Compaction Effect on Permeability in Infusion Processes
    8th International Conference on Composites Testing and Model Identification, Leuven, Belgium, Apr 2017

  • Neumann, A., Pickett, A. and Middendorf, P.
    Finite Element and Experimental Stress Analysis of Laminated Composite Compression Specimens
    8th International Conference on Composites Testing and Model Identification, Leuven, Belgium, Apr 2017

  • Bauer, F., Middendorf, P., Kempf, M. and Weiland, F.
    Basalt Fiber Reinforced Composites for Elevated Application Temperatures
    25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017

  • Dittmann, J., Dollinger, F., Kaufmann L. and Middendorf, P.
    Numerical Permeability Prediction with OpenFOAM
    25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017

  • Gnädinger, F., Middendorf, P. and Fox, B.
    Influence of Carbon Fibre Sizings and Matrix Resins on Fibre-Matrix Adhesion: Flexure and Shear Measurements of CFRP-Laminates
    25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017

  • Heudorfer, K., Carosella, S. and Middendorf, P.
    Compression Wet Moulding as Alternative to RTM 
    25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017

  • Szcesny, M., Heudorfer, K., Middendorf, P., Blumrich, R., Riegel M. and Wiedemann, J.
    Design, Manufacturing and Application of Carbon Fiber Reinforced Airfoils Used to Create Turbulence and Gusts in a Vehicle Wind Tunnel
    25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017

  • Wolfinger, B., Carosella, S. and Middendorf, P.
    Complex Carbon/PA6 Hybrid Yarn Structures Made by Tailored Fibre Placement
    25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017

  • Wellekötter, J., Bonten, C., Baz, S., Gresser, T., Schwingel, J. and Middendorf, P.
    Resource-Efficient Lightweight Design Due to New Recycling Concept
    25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017

2016

  • Michaelis, D.
    Prüfverfahren von CFK-Geflechten
    CCeV Thementag Flechten, Stuttgart, Dec 2016

  • Schwingel, J.
    Resource and Energy Efficient Manufacturing of Automotive Lightweight Parts Made of Recycled Material
    International Textile Conference 2016 (Aachen-Dresden-Denkendorf), Dresden, Nov 2016

  • Dittmann, J., Böhler, P., Michaelis, D. and Middendorf, P.
    DigitPro – Aufbau eines digitalen Prototyps für den industriellen Großeinsatz 4.0
    NAFEMS Seminar - Simulation von Composites – Bereit für Industrie 4.0, Hamburg, Oct 2016

  • Dittmann, J. and Middendorf, P.
    ARENA2036 – Above-and-Beyond
    LS-Dyna User Forum, Bamberg, Oct 2016

  • Middendorf, P.
    DigitPro: Ganzheitlicher digitaler Prototyp für industriellen FVK-Leichtbau
    Forel Kolloquium, Oct 2016

  • Klett, Y., Muhs, F. and Middendorf, P.
    Behavior of Congruent Tessellation Stacks Under Torsional Loading
    ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2016), Charlotte, USA, Aug 2016

  • Dittmann, J., Hügle, S. and Middendorf, P.
    Numerical 3D Permeability Prediction Using Computational Fluid Dynamics Techniques
    FPCM - 13th Internation Conference on Flow Processes in Composite Materials, Kyoto, Japan, Jul 2016

  • Dittmann, J., Michaelis, D., Böhler, P. and Middendorf, P.
    DigitPro - Validating The Link Between Braiding Simulation, Infiltration and Mechanical Testing
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Dittmann, J. and Middendorf, P.
    DigitPro - Ganzheitlicher digitaler Prototyp im Leichtbau für die Großserienproduktion
    Fachtagung „Wissenschaft und Wirtschaft nachhaltig vernetzen“, Berlin, Jun 2016

  • Engelfried, M., Nosek, T., Heieck, F., Böhler, P. and Middendorf, P.
    Lowflip - Draping Simulation of Prepregs at Mesoscopic and Macroscopic Level
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Fial, J., Böhler, P. and Middendorf, P.
    Advanced Forming of Tailored Textiles Using Locally Modified Properties for Optimized Lightweight Structures
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Gizik, D., Metzner, C. and Middendorf, P.
    Spreading of Heavy Tow Carbon Fibers for the use in aircraft structures
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Heieck, F. and Middendorf, P.
    Effect of the Cover Factor of 2D Biaxial and Triaxial Braided Carbon Composites on Their In-Plane Mechanical Properties
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Koch, C., Lemmer, F., Borisade, F., Matha, D. and Cheng, P.W.
    Validation of INNWIND.EU scaled model tests of a semisubmersible floating wind turbine
    International Ocean and Polar Engineering Conference, Rhodos, Greece, Jun 2016 DOI

  • Michaelis, D. and Middendorf, P.
    Characteristic Load Cases of Biaxial Braids
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Muhs, F., Klett, Y. and Middendorf, P.
    Influence of Geometry and Base Material on the Compressive Properties of Foldcores
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Sachse, R., Pickett, A.K., Gnädinger, M. and Middendorf, P.
    Mechanisms to Arrest a Crack in the Adhesive Bondline of Fatigue Loaded CFRP-Joints Using a Rivetless Nutplate Joint
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Tartler, M., Hägele, D., Fial, J., Engelfried, M., Karb, I. and Middendorf, P.
    Investigation and Simulation of Forming Behaviour of Preforms Made by Direct Fibre Placement
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Zink, D., Awe, C. and Middendorf, P.
    Automated Design Approach and Potential Assessment of Composite Structures: Fast Analytical Engineering Tool for Multiple Load Cases
    ECCM17 – 17th European Conference on Composite Materials, Munich, Jun 2016

  • Meiler, S., Fey, P., Kreutzbruck, M., Draskovic, M. and Middendorf, P.
    Nondestructive Testing of CFRP with Thermoplastic Matrix
    ANTEC, Indianapolis, USA, May 2016

  • Vinot, M., Holzapfel, M., Michaelis, D., Dittmann, J., Böhler, P., Middendorf, P. and Liebold, C.
    Numerische Prozesskette für die Auslegung von geflochtenen Fahrzeugkomponenten - Nutzen und Herausforderungen
    Symposium Faszination Hybrider Leichtbau, Wolfsburg, May 2016

  • Blandl, M.
    Development of an Alternative Method for Fiber Impregnation
    EPTA - 13th World Pultrusion Conference, Prague, Czech Republic, Mar 2016

  • Carosella, S.
    Recent Developments and Research Results regrading TFP-Technology at the Institute of Aircraft Design
    CCeV Thementag Tailored Fiber Placement, Dresden, Mar 2016

  • Middendorf, P., Michaelis, D., Böhler, P., Dittmann, J. and Heieck, F.
    ARENA2036 - DigitPro: Development of a Virtual Process Chain
    16th Stuttgart International Symposium on Automotive and Engine Technology, Stuttgart, Mar 2016

  • Luhmann, B., Borisade, F., Raach, S. and Cheng, P.W.
    Coupled Aero-Elastic Multi-Body Simulation of Two-Bladed Wind Turbines in Wind Park Arrays
    AIAA conference, San Diego, USA, Jan 2016

2015

  • Dittmann, J., Böhler, P., Michaelis, D., Vinot, M., Liebold, C., Fritz, F., Finckh, H. and Middendorf, P.
    DigitPro - Digital Prototype Build-up Using the Example of a Braided Structure
    2. International Merge Technologies Conference, Chemnitz, 2015

  • Dittmann, J.
    Permeabilitätsbestimmung und der Weg zu aussagekräftigen Füllsimulationen
    AFBW AG Simulation, Fellbach, 2015

  • Middendorf, P., Böhler, P., Dittmann, J., Michaelis, D. and Heieck, F.
    DigitPro - Holistic digital prototype for lightweight design in large-scale production
    JEC Singapore, Singapore, 2015

  • Middendorf, P., Sommer-Dittrich, T., Böhler, P., Dittmann, J., Michaelis, D., Heieck, F. and Zuleger, S.
    Forschungscampus ARENA2036 - Leichtbau durch Funktionsintegration und Aufbau einer digitalen Prozesskette
    ATZ Tagung, Stuttgart, 2015

  • Sachse, R., Pickett, A.K., Käß, M. and Middendorf, P.
    Numerical Simulation of Fatigue Crack Growth in the Adhesve Bondline of Hybrid CFRP Joints
    COMPOSITES 2015, Bristol, 2015

  • Fürst, H., Schlipf, D., Latour, M.I. and Cheng, P.W.
    Design and evaluation of a lidar-based feedforward controller for the INNWIND.EU 10 MW wind turbine
    European Wind Energy Association Annual Event (EWEA), Paris, France, Nov 2015

  • Lay, J., Schumann, L., Geiß, I. and Strohmayer, A.
    Electric and Hybrid Aircraft - Current Research at the University of Stuttgart
    10th AirTec, Munich, Nov 2015

  • Schlipf, D., Fleming, P., Raach, S., Scholbrock, A., Haizmann, F., Krishnamurthy, R., Boquet, M. and Cheng, P.W.
    An adaptive data processing technique for lidar-assisted control to bridge the gap between lidar systems and wind turbines
    European Wind Energy Association Annual Event (EWEA), Paris, France, Nov 2015

  • Wortmann, S., Haizmann, F., Geisler, J. and Konigorski, U.
    Comparison of Feedback and Ideal and Realistic Lidar-Assisted Feedforward Individual Pitch Control
    Scientific Track of European Wind Energy Association Annual Event (EWEA), Paris, France, Nov 2015

  • Beyer, F. and Cheng, P.W.
    Load Simulation of Offshore Wind Turbines - Modeling Techniques and Validation by Measurements
    SIMPACK Wind and Drivetrain Conference 2015, Hamburg, Oct 2015

  • Böhler, P. and Middendorf, P.
    Mesoskopisches Drapieren - Simulation und Vailidierung
    LBZ-Tagung, Pfinztal, Oct 2015

  • Fuhr, J.P. and Middendorf, P.
    Validierung der virtuellen Auslegungsprozesskette für schichtbasierte Faserverbundstrukturen
    ESI DACH Forum, Bamberg, Oct 2015

  • Raach, S., Schlipf, D., Trujillo, J.J., Cheng and P., W
    Lidar-based wake tracking for wind farm control at alpha ventus
    RAVE Offshore Wind R&D Conference, Bremerhaven, Oct 2015

  • Würth, I., Haizmann, F., Anger, J., Schlipf, D., Hofsäß, M., Raach, S. and Cheng, P.W.
    Four years of nacelle-based lidar measurements in alpha ventus - a review
    RAVE Offshore Wind R&D Conference, Bremerhaven, Oct 2015

  • Arnold, M., Biskup, F. and Cheng, P.W.
    Impact of Structural Flexibility on Loads on Tidal Current Turbines
    11th European Wave and Tidal Energy Conference, Nantes, France, Sep 2015

  • Arnold, M., Biskup, F. and Cheng, P.W.
    Load Reduction Potential of Variable Speed Control Approaches for Fixed Pitch Tidal Current Turbines
    11th European Wave and Tidal Energy Conference, Nantes, France, Sep 2015

  • Klett, Y. and Middendorf, P.
    Kinematic analysis of congruent multilayer tessellations
    ASME International Design Engineering Technical Conferences, Boston, USA, Aug 2015

  • Bezerra, R., Wilhelm, F., Strauß, S. and Ahlborn, H.
    Manufacturing of Complex Shape Composite Parts through the Combination of Pull-Braiding and Blow Moulding
    ICCM20 - 20th International Conference on Composite Materials, Copenhagen, Denmark, Jul 2015

  • Fateri, M., Gebhardt, A., Gabrielli, R.A., Herdrich, G., Fasoulas, S., Großmann, A., Schnauffer, P. and Middendorf, P.
    Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
    30th ISTS, Kobe, USA, Jul 2015

  • Fernández, D. and Middendorf, P.
    Study of the Influence of UV-Light on CFRP Laminates Stitched with Aramid Thread
    ICCE-23, Chengdu, China, Jul 2015

  • Gabrielli, R.A., Mathies, J, Großmann, A., Herdrich, G., Fasoulas, S., Schnauffer, P., Middendorf, P., Fateri, M. and Gebhardt, A.
    Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith
    30th ISTS, Kobe, USA, Jul 2015

  • Gabrielli, R.A., Seelmann, J., Großmann, A., Herdrich, G., Fasoulas, S., Schnauffer, P., Middendorf, P., Fateri, M. and Gebhardt, A.
    System Architecture of a Lunar Industry Plant Using Regolith
    30th ISTS, Kobe, USA, Jul 2015

  • Gizik, D., Metzner, C. and Middendorf, P.
    First Study on using Heavy Tow Fibers for Textile Preform Processes in the Aerospace Industry
    ICCM20 - 20th International Conference on Composite Materials, Copenhagen, Denmark, Jul 2015

  • Großmann, A., Gabrielli, R.A., Herdrich, G., Fasoulas, S., Schnauffer, P., Middendorf, P., Fateri, M. and Gebhardt, A.
    Overview of the MultiRob 3D Lunar Industrial Development Project
    30th ISTS, Kobe, USA, Jul 2015

  • Haizmann, F., Schlipf, D., Raach, S., Scholbrock, A., Wright, A., Slinger, C., Medley, J., Harris, M., Bossanyi, E. and Cheng, P.W.
    Optimization of a feed-forward controller using a CW-lidar system on the CART3
    American Control Conference, Chicago, USA, Jul 2015

  • Heieck, F. and Middendorf, P.
    Technological approaches on cost reduction challenges for thermoset composites
    JEC Americas Conference, Houston, USA, Jul 2015

  • Raach, S., Schlipf, D., Trujillo, J.J. and Cheng, P.W.
    Model-based wake tracking using lidar measurements for wind farm control
    Windfarms 2015 conferences, Leuven, Belgium, Jul 2015

  • Sachse, R., Pickett, A.K., Adebahr, W., Klein, M., Käß, M. and Middendorf, P.
    Experimental investigation of mechanical fasteners regarding their influence on crack growth in adhesively bonded CFRP-joints subjected to fatigue loading
    in 20th Internactional Conference on Composite Materials, Copenhagen, Jul 2015

  • Tiana-Alsina, J., Gutierrez, M.A., Würth, I., Puigdefabregas, J. and Rocadenbosch, F.
    Motion compensation study for a floating Doppler wind lidar
    IGARSS, Milan, Italy, Jul 2015

  • Arnold, M., Kretschmer, M., Biskup, F., Koch, J. and Cheng, P.W.
    A Validation Method for Fluid-Structure-Interaction Simulations Based on Submerged Free Decay Experiments
    25th ISOPE, Kona, USA, Jun 2015

  • Beyer, F., Choisnet, T., Kretschmer, M. and Cheng, P.W.
    Coupled MBS-CFD Simulation of the IDEOL Floating Offshore Wind Turbine Foundation Compared to Wave Tank Model Test Data
    25th ISOPE, Kona, USA, Jun 2015

  • Biskup, F., Arnold, M., Daus, P. and Engbroks, L.
    Actuator Disc Model of a Tidal In-Stream Energy Converter - Voith HyTide
    25th ISOPE, Kona, USA, Jun 2015

  • Heieck, F.
    Quality Assessment of 2D Braided Composites with Optical Measurement Techniques
    18th International Conference on Composite Structures, Lisbon, Portugal, Jun 2015

  • Lemmer, F., Raach, S., Schlipf, D. and Cheng, P.W.
    Prospects of Linear Model Predictive Control on a 10MW Floating Wind Turbine
    Proceedings of the ASME 34th International Conference on Ocean & Offshore and Arctic Engineering, St. John’s, Kanada, Jun 2015

  • Beyer, F., Luhmann, B., Raach, S. and Cheng, P.W.
    Shadow Effects in an Offshore Wind Farm - Potential of Vortex Methods for Wake Modelling
    German Wind Energy Conference (DEWEK), Bremen, May 2015

  • Böhler, P., Carosella, S., Götz, C. and Middendorf, P.
    Reverse Draping - oder - Woher kommen Fasergerechte Ablagepfade für den TFP-Prozess“
    Compoform 2015, Munich, May 2015

  • Haizmann, F., Schlipf, D. and Cheng, P.W.
    Correlation-Model of Rotor-Effective Wind Shears and Wind Speed for LiDAR-based Individual Pitch Control
    German Wind Energy Conference (DEWEK), Bremen, May 2015

  • Hofsäß, M., Kozlowski, D., Siebers, T. and Cheng, P.W.
    Comparison of the Rotor Equivalent Wind Speed of Ground- and Nacelled-Based LIDAR
    German Wind Energy Conference (DEWEK), Bremen, May 2015

  • Matha, D., Beyer, F., Lemmer, F. and Cheng, P.W.
    Model Testing and Numerical Simulation in Floating Offshore Wind Turbine Design - Overview and Conclusions from practical Applications
    German Wind Energy Conference (DEWEK), Bremen, May 2015

  • Würth, I. and et. al.
    Determination of stationary and dynamical power curves in inhomogeneous wind flow using a nacelle-based lidar system
    German Wind Energy Conference (DEWEK), Bremen, May 2015

  • Blandl, M.
    Alternative TowPregs - A further developed impregnation technology for semi-finished fiber products
    Hannovermesse 2015, Hannover, Apr 2015

  • Beyer, F., Choisnet, T., Favré, M. and Cheng, P.W.
    Simplified Aerodynamic Models with Limited Rotor Data for the Design of Floating Offshore Wind Turbine Support Structures
    EWEA Offshore, Copenhagen, Denmark, Mar 2015

  • Fey, P., Busse, G., Kreutzbruck, M., Michaelis, D. and Middendorf, P.
    Non-Destructive Monitoring of Damage in CFRP Laminates using Ultrasonic Birefringence
    ANTEC 2015, Orlando, USA, Mar 2015

  • Manjock, A., Bredmose, H., Azcona, J., Lemmer, F., Amann, F. and Campagnolo, F.
    Rotor Aerodynamics For Tank Tests Of Scaled Floating Wind Turbines
    EWEA Offshore, Copenhagen, Denmark, Mar 2015

  • Raach, S., Schlipf, D., Haizmann, F., Fürst, F., Würth, I. and Cheng, P.W.
    Advances in lidar-assisted control and power curve measurement of wind turbines in the LIDAR II project
    EWEA Offshore, Copenhagen, Denmark, Mar 2015

  • Reiling, J.M., Middendorf, P. and Sindel, M.
    Quality assurance of adhesive processes in the body shop
    15thStuttgart International Symposium on Automotive and Engine Technology, Stuttgart, Mar 2015

  • Adebahr, W., Rahammer, M., Sachse, R., Gröninger, S., Käß, M., Kreutzbruck, M. and Busse, G.
    Crack growth monitoring at CFK adhesive bondings
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Ahlborn, H.
    Herstellung komplexer FVK-Bauteile mittels Flechtpultrusion und Blasumformung
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Blandl, M.
    Entwicklung eines alternativen Imprägnierverfahrens für Faserhalbzeuge
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Dittmann, J., Neu, A. and Middendorf, P.
    Permeabilitätsbestimmung für die optimierte Herstellung von endlosfaserverstärkten Kunststoffen
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Dittmann, J.
    Permeabilitätsbestimmung für die optimierte Herstellung von Faser-Kunststoff-Verbunden
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Fey, P., Michaelis, D., Middendorf, P., Busse, G. and Kreutzbruck, M.
    Charakterisierung anisotroper Schädigung in CFK mittels Akustischer Doppelbrechung
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Gnädinger, F.
    Einfluss der Faserschlichte auf die Faser-Matrix Haftung. Qualitative Untersuchungen für verschiedene Polymerschlichten und -harzsysteme
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Reiling, J.M.
    Eigenschaftsprofil von Klebverbindungen im Karosseriebau
    24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015

  • Sandner, F., Amann, F., Azcona, J., Munduate, X., Bottasso, C.L., Campagnolo, F., Bredmose, H., Manjock, A., Pereira, R. and Robertson, A.
    Model Building and Scaled Testing of 5MW and 10MW Semi-Submersible Floating Wind Turbines
    EERA Deepwind, Trondheim, Norway, Feb 2015

  • Sandner, F., Yu, W. and Cheng, P.W.
    Parameterized Dynamic Modelling Approach for Conceptual Dimensioning of a Floating Wind Turbine System
    EERA Deepwind, Trondheim, Norway, Feb 2015

  • Schumann, L.
    Elektroflug im praktischen Einsatz
    e²-Symposium, Stuttgart, Feb 2015

  • Fuhr, J.P. and Middendorf, P.
    From draping to fracture - Tool chain validation for ply-based composite structures
    Composites Virtual Prototyping Expert Seminar, Stuttgart, Jan 2015

2014

  • Raach, S., Schlipf, D., Haizmann, F. and Cheng, P.W.
    Three Dimensional Dynamic Model Based Wind Field Reconstruction from Lidar Data
    Journal of Physics: Conference Series, Copenhagen, Denmark, 2014

  • Bischoff, O., Wuerth, I., Cheng, P.W., Alsina, J.T. and Gutierrez, M.
    Motion effects on lidar wind measurement data of the EOLOS buoy
    RENEW, Lisbon, Portugal, Nov 2014

  • Fuhr, J., Böhler, P., Heieck, F., Miene, A. and Middendorf, P.
    Optische Preformanalyse zur 3D-Validierung der Drapier- und Flechtsimulation
    FCC2014, Augsburg, Nov 2014

  • Kärger, L., Böhler, P., Magagnato, D., Galkin, S. and Henning, F.
    Virtuelle Prozesskette für Bauteile aus Hochleistungsfaserverbund
    FCC2014, Augsburg, Nov 2014

  • Beyer, F., Matha, D., Arnold, M., Luhmann, B. and Cheng, P.W.
    Coupled CFD and Vortex Methods for Modelling Hydro- and Aerodynamics of Tidal Current Turbines and On- and Offshore Wind Turbines
    Simpack User Meeting 2014, Augsburg, Oct 2014

  • Fuhr, J.P., Feindler, N. and Middendorf, P.
    Virtuelle Bewertung von Drapiereinflüssen auf die Steifigkeit und Festigkeit von schichtbasierten Faserverbundstrukturen
    NAFEMS Seminar, Leipzig, Oct 2014

  • Kärger, L., Fritz, F., Magagnato, D., Galkin, S., Schön, A., Oeckerath, A., Wolf, K. and Henning, F.
    Development Stage and Application of a Virtual Process Chain for RTM Components
    Proceedings NAFEMS Seminar “Simulation of Composites – A Closed Process Chain”, Leipzig, Oct 2014

  • Geiß, I. and Voit-Nitschmann, R.
    Dimensionierung des Energiespeichers hybrider Elektroflugzeuge
    Deutscher Luft- und Raumfhartkongress, Augsburg, Sep 2014

  • Müller, K., Sandner, F., Bredmose, H., Azcona, J., Manjock, A. and Pereira, R.
    Improved Tank Test Procedures For Scaled Floating Offshore Wind Turbines
    International Wind Engineering Conference IWEC, Hannover, Sep 2014

  • Klett, Y. and Middendorf, P.
    Kinematic exploration of 1-DOF origami mechanisms
    Proceedings of the the 16th International Conference on Geometry and Graphics, Innsbruck, Austria, Aug 2014

  • Arnold, M., Daus, R., Biskup, F. and Cheng, P.W.
    Tidal Current Turbine Wake and Park Layout in transient Environments
    33rd OMAE, Jul 2014

  • Dittmann, J.
    Permeability determination of resistive welded carbon fabrics
    FPCM, Enschede, Jul 2014

  • Heieck, F.
    Klein, groß, günstig, schnell - Textilbasierter Faserverbund-Leichtbau für die Serie
    Industrial Composites Production Conference (AUTOMATICA), Augsburg, Jul 2014

  • Prieß, T. and Middendorf, P.
    Thermische Eigenschaften von Kohlenstoffasern im Hochtemperaturbereich
    4. CFK-Workshop am Institut für Strahlwerkzeuge (IFSW), Stuttgart, Jul 2014

  • Beyer, F., Arnold, M. and Cheng, P.W.
    Simulation of Ocean Waves for Load Assessment of Surface Piercing and Fully Submerged Bodies with Ansys CFX
    Ansys Conference 32. CADFEM User's Meeting 2014, Nürnberg, Jun 2014

  • Middendorf, P.
    ARENA2036 - Lightweight design and flexible production for next generation automobiles
    ICPC Konferenz, Munich, Jun 2014

  • Raach, S., Schlipf, D., Sandner, F., Matha, D. and Cheng, P.W.
    Nonlinear Model Predictive Control of Floating Wind Turbines with Individual Pitch Control
    American Control Conference, Portland, USA, Jun 2014

  • Robertson, A. and al , F.B.e.
    Offshore Code Comparison Collaboration Continuation Within IEA Wind Task 30: Phase II Results Regarding a Floating Semisubmersible Wind System
    33rd International Conference on Ocean & Offshore and Arctic Engineering (OMAE), San Francisco, USA, Jun 2014

  • Sandner, F., Schlipf, D., Matha, D. and Cheng, P.W.
    Integrated Optimization of Floating Wind Turbine Systems
    33rd International Conference on Ocean & Offshore and Arctic Engineering OMAE, San Francisco, USA, Jun 2014

  • Schlipf, D., Grau, P., Raach, S., Duraiski, R., Trierweiler, J. and Cheng, P.W.
    Comparison of linear and nonlinear model predictive control of wind turbines using LIDAR
    American Control Conference, Portland, USA, Jun 2014

  • Carosella, S.
    Tailored Fibre Placement - a look on its benchmarks
    ICS America, Atlanta, USA, May 2014

  • Härtel, F., Böhler, P. and Middendorf, P.
    An Integral Mesoscopic Material Characterization Approach
    ESAFORM2014, Helsinki, May 2014

  • Heieck, F. and Fuhr, J.P.
    Wann ist eine Preform 'gut'? Qualitätsbestimmung mit optischer Texturanalyse
    1. Technologietag Hybrider Leichtbau, Stuttgart, May 2014

  • Molins, C., Campos, A., Sandner, F. and Matha, D.
    Monolithic Concrete Off-Shore Floating Structure For Wind Turbines
    Proceedings of the EWEA, Barcelona, Spain, May 2014

  • Beyer, F. and Cheng, P.W.
    Dynamic Behaviour of Floating Offshore Wind Turbines
    IEA R&D Wind Task XI, Las Palmas, Spain, Apr 2014

  • Böhler, P., Carosella, S., Götz, C. and Middendorf, P.
    Path definition for tailored fiber placement structures using numerical reverse draping approach
    ESAFORM2015, Graz, Austria, Apr 2014

  • Fuhr, J.P., Baumann, J., Härtel, F., Feindler, N. and Middendorf, P.
    Effects of in-plane waviness on the properties of carbon composites - experimental and numerical analysis
    6th International Conference on Composites Testing and Model Identification, Aalborg, Denmark, Apr 2014

  • Haizmann, F., Schlipf, D., Cosack, N., Neuhaus, D., Raach, S., Maul, T. and Cheng, P.W.
    Field Testing of LiDAR assisted Feed-Forward Control on a Large Commercial Wind Turbine
    EWEA Annual Event, Barcelona, Spain, Mar 2014

  • Metzner, C., Gessler, A., Weimer, C., Beier, U. and Middendorf, P.
    Performance assessments on unidirectional braided CFRP materials
    SEICO14, Paris, France, Mar 2014

  • Trujillo, J.J., Seifert, J.K., Kühn, M., Schlipf, D. and Würth, I.
    Measuring wind turbine yaw misalignment by near wake tracking
    EWEA Annual Event, Barcelona, Spain, Mar 2014

  • Böhler, P., Härtel, F. and Middendorf, P.
    Mesoskopisches Drapieren: Simulation und Validierung
    SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014

  • Fuhr, J.P., Feindler, N. and Middendorf, P.
    Berücksichtigung von Fertigungseinflüssen in der Strukturauslegung von schichtbasierten Faserverbundwerkstoffen
    SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014

  • Prieß, T., Onuseit, V., Wiedenmann, M., Freitag, C., Weber, R., Middendorf, P., Graf and T
    Produktive Laserbearbeitung von CFK - der Laser als Werkzeug
    SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014

  • Schumann, L. and Middendorf, P.
    FVK in der allgemeinen Luftfahrt - Leichtbau am Beispiel des Elektroflugzeugs e-Genius
    SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014

  • Schumann, L.
    e-Genius auf den Green Speed Cup 2013
    IDAFLIEG Wintertreffen, Stuttgart, Jan 2014

2013

  • Beilstein, L., Arnold, M. and Rudolph, S.
    Methodische Darstellung der „Relativität“ von Optimalbegriffen im Flugzeugvorentwurf am Beispiel von Flugzeugpanels
    DLRK, Stuttgart, 2013

  • Böhler, P., Michaelis, D., Heieck, F. and Middendorf, P.
    Numerical prediction and experimental validation of triaxially braided fibre architecture on curved mandrels
    TexComp-11, Leuven, 2013

  • Bulat, M., Wascinski, Middendorf, P. and Rödel
    Consolidation of braid-based CFRP structures using an expandable mandrel
    ICCM, Montreal, 2013

  • Draskovic, M., Galappathithi, U., Pickett, A.K., Capellaro, M. and Middendorf, P.
    Influence of ply waviness on residual strength and fatigue degradation of composite wind turbine blades
    ICCM19, Montreal, 2013

  • Galappathithi, U., Pickett, A., Draskovic, M., Capellaro, M. and De Silva. A. K. M.
    The Effect of Ply Waviness for the Fatigue Life of Composite Wind Turbine Blades
    ICREPQ 13 (RE&PQJ), Bilbao, 2013

  • Gnaedinger, F., Middendorf, P., Karcher, Chaudhari and Henning, F.
    Realisierung und Potential von Hohlstrukturbauteilen mit Hinterschnitt im RTM-Verfahren für die automobile Großserie
    19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 2013

  • Gnaedinger, F., Middendorf, P., Karcher and Henning, F.
    Holistic Design Process for Hollow Structures based on Braided Textiles and RTM
    ICCST-9, Sorrento, 2013

  • Härer, A, Matha, D., Kucher, D and Sandner, F.
    Optimization of offshore wind turbine components in multi-body simulations for cost and load reduction
    EWEA Offshore, Frankfurt, 2013

  • Härtel, F., Böhler, P. and Middendorf, P.
    Identification of forming limits for unidirectional carbon textiles in reality and mesoscopic simulation
    ESAForm, Aveiro, 2013

  • Härtel, F. and Middendorf, P.
    Process parameter studies and comparison of different preform processes with NCF material
    ICCM 19, Montreal, 2013

  • Kärger, L., Schön, A., Fritz, F., Böhler, P., Maganato, D., Fischer, S. and Henning, F.
    Virtual Process Chain for an integrated assessment of high-performance composite structures
    NAFEMS World Congress, Salzburg, Austria, 2013

  • Kilchert, May, Gnaedinger, F., Karcher and Schoepfer
    Einfluss des Flechtwinkels auf die Werkstoffeigenschaften von Tri-Axialen Geflechten
    19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 2013

  • Pickett, A.K., Sirtautas, J. and Masseria
    Challenges of VARI process simulation: materials testing and simulation approaches
    CCeV, Augsburg, 2013

  • Pickett, A.K., Sirtautas, J. and Masseria
    Process and challenges for resin infusion simulation of large structural composite parts
    CCeV, Stuttgart, 2013

  • Pickett, A.K., Sirtautas, J. and Masseria
    Resin infusion simulation for large structural composite parts
    TexComp-11, Leuven, 2013

  • Sandner, F. and Cheng, P.W.
    Conceptual design of floating wind turbines
    In Proceedings of the 9th PhD Seminar on Wind Energy in Europe, Visby, 2013

  • Schlipf, D., Fleming, Kapp, Scholbrock, Haizmann, Belen, Wright and Cheng, P.W.
    Direct Speed Control Using LIDAR and Turbine Data
    American Control Conference, Washington, 2013

  • Schlipf, D.
    Lidars and Wind Turbine Control - Part 1 (Chapter 9 in Remote Sensing for Wind Energy)
    DTU Wind Energy-E-Report-0029(EN), Roskilde, 2013

  • Scholbrock, Fleming, Fingersh, Wright, Schlipf, D., Haizmann and Belen
    Field Testing LIDAR-Based Feed-Forward Controls on the NREL Controls Advanced Research Turbine
    51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Grapevine, 2013

  • Sirtautas, J. and Pickett, A.K.
    Fabric permeability testing and their use in infusion simulation
    CompTest, Aalborg, 2013

  • Middendorf, P. and Drechsler, K.
    Networks and Private Public Partnerships for R&D on Automotive Composites
    IQPC Automotive Composites, Köln, Dec 2013

  • Böhler, P., Härtel, F., Pickett, A.K. and Middendorf, P.
    Mesoskopischer Ansatz für die Drapiersimulation von unidirektionalen vernähten Textilien
    ESI DACH Forum, Wiesbaden, Nov 2013

  • Böhler, P., Härtel, F. and Middendorf, P.
    Drapieren: Simulation und Verifikation
    CCeV, Meitingen, Oct 2013

  • Middendorf, P.
    Manufacturing technologies for load-path oriented design: An overview
    JEC Americas, Boston, USA, Oct 2013

  • Arnold, M., Biskup, F., Matha, D. and Cheng, P.W.
    Simulation of Rotor-Foundation-Interaction on Tidal Current Turbines with Computational Fluid Dynamics
    10th EWTEC, Sep 2013

  • Biskup, F., Arnold, M., Daus, P., Arlitt, R. and Hohberg, M.
    Effects of Rotor Blade Tip Modifications on a Tidal In-Stream Energy Converter - Voith HyTide
    10th EWTEC, Sep 2013

  • Haizmann, F. and Cheng, P.W.
    Advanced Lidar-Assisted Control of Wind Turbines
    9th EAWE PhD Seminar on Wind Energy in Europe, Visby, Sep 2013

  • Klett, Y.
    Realtime rigid folding algorithm for quadrilateral- based 1-DOF tessellations
    ASME International Design Engineering Technical Conferences, Portland, USA, Aug 2013

  • Bender, B., Middendorf, P., Ehard and Milosev
    Stoffschlüssiges Fügen von Aluminium und CFK durch die Epoxidharz-Matrix für die Herstellung hybrider Strukturbauteile
    19. Symposium Verbundwerkstoffe und Werkstoffverbund, Karlsruhe, Jul 2013

  • Kärger, L., Magagnato, D., Schön, A., Böhler, P., Fischer, S., Fritz, F. and Henning, F.
    Aufbau einer durchgängigen CAE-Kette durch Verknüpfung von Drapier-, Formfüll- und Struktursimulation zur ganzheitlichen Bewertung von Bauteilen aus Hochleistungsfaserverbunden
    DGM Tagung Verbundwerkstoffe / Werkstoffverbunde 2013, Karlsruhe, Jul 2013

  • Markus, D., Wüchner, R., Arnold, M., Bletzinger, K.U. and Hojjat, M.
    A reduced modeling Methodology for efficient Ocean Wave CFD Simulation of fully submerged Structures
    32nd OMAE, Jul 2013

  • Prieß, T. and Middendorf, P.
    Gemeinsamkeiten von lasergeschnittenen Kohlenstofffasern und Wattestäbchen
    3. CFK-Workshop am Institut für Strahlwerkzeuge, Stuttgart, Jul 2013

  • Schlipf, D., Sandner, F., Raach, S., Matha, D. and Cheng, P.W.
    Nonlinear Model Predictive Control of Floating Wind Turbines
    ISOPE, Anchorage, USA, Jul 2013

  • Arnold, M., Biskup, F. and Cheng, P.W.
    Simulation of Fluid-Structure-Interaction on Tidal Current Turbines based on coupled Multibody and CFD Methods
    23rd ISOPE, Jun 2013

  • Arnold, M. and Cheng, P.W.
    Simulation of Fluid-Structure-Interaction on Tidal Current Turbines with flexible Multibody Systems and Ansys CFX
    31st ACUM, Jun 2013

  • Beyer, F., Arnold, M. and Cheng, P.W.
    Analysis of Floating Offshore Wind Turbine Hydrodynamics using coupled CFD and Multibody Methods
    23rd International Ocean and Polar Engineering Conference (ISOPE), Anchorage, USA, Jun 2013

  • Middendorf, P. and Popp
    Advances in Composite Repair
    JEC Asia, Singapore, Jun 2013

  • Weber and Middendorf, P.
    Semi-analytical skin buckling of curved orthotropic grid-stiffened shells
    Proceedings of ICCS17, Porto, Portogal, Jun 2013

  • Carosella, S.
    Lastpfadgerechte Auslegung und Fertigungsverfahren für Faserkunststoffverbunde
    Sika-Technologieforum, Ingolstadt, May 2013

  • Schumann, L.
    Electric Aircraft research - two years of flying e-Genius
    Electric aircraft symposium, Santa Rosa CA, May 2013

  • Carosella, S. and Middendorf, P.
    Der Weg zum FVK mit Hilfe direkter Preformverfahren
    23. Stuttgarter Kunststoff-Kolloquium, Stuttgart, Mar 2013

  • Heieck, F.
    Entwicklung eines Handhabungsgerätes in Faserverbundbauweise
    2. Augsburger Technologietransfer-Kongress, Augsburg, Mar 2013

  • Middendorf, P.
    Potenzial und Einsatzgebiete von FKV für Leichtbauanwendungen
    23. Stuttgarter Kunststoff Kolloquium, Stuttgart, Mar 2013

  • Haizmann, F., Fleming, P., Schlipf, D., Scholbrock, A., Hofsäß, M., Wright, A. and Cheng, P.W.
    Implementation of an Online Correlation Analysis for an Adaptive LiDAR based Feed-Forward Controller for Wind Turbines
    EWEA Annual Event, Vienna, Feb 2013

  • Schumann, L.
    Flugleistungsvermessung des e-Genius
    IDAFLIEG Wintertreffen, Hannover, Jan 2013

  • Schumann, L.
    Massenreduktion durch Weglassen - Theoretische Baukonzeptuntersuchung
    IDAFLIEG Wintertreffen, Hannover, Jan 2013

2012

  • Baumann, Härtel, Middendorf, Milwich, Müller and Planck
    Experimental Draping Studies Based on Standard Textile Testing
    Annual World Conference on Carbon 2012, Krakow, 2012

  • Birkefeld and Middendorf
    Optimization of Braided Structures With a Genetic Algorithm Considering Production Aspects
    SETEC 12, Lucerne, 2012

  • Birkefeld, Reden and Middendorf
    Material Quality of Braided Fuselage Profiles
    AIAA SDM Conference, Honolulu, 2012

  • Birkefeld
    Analysis and Process Simulation of braided structures
    EUCOMAS, Zürich, 2012

  • Böhler, Bouc, Ahlborn and Middendorf
    Innovative joining of aircraft profiles with braided holes
    ECCM 15, Venedig, 2012

  • Breede, Frieß, Jemmali, Koch, Voggenreiter and Frenzel
    Mechanical and microstructural characterization of C/C-SIC manufactured via triaxial and biaxial braided fiber preforms
    International conference and Expo on advanced ceramics and composites, Daytona Beach, 2012

  • Bulat, Kehrle, Drechsler and Bommes
    Effects of pressurized cores on the properties of braided CFRP structures
    SAMPE EUROPE 33rd, Paris, 2012

  • Dolezal, Kittmann, Senner and Claupein
    Collecting geo-referenced data for agricultural purposes with an UAS
    3rd International Conference on Machine Control & Guidance, Stuttgart, 2012

  • Dransfeld, Siegfried, Birkefeld and Reden
    FX-CORE: Functional braiding mandrel for the compression resin transfer moulding of profiles
    SAMPE EUROPE 33rd, Paris, 2012

  • Dransfeld, Siegfried, Birkefeld and Reden
    FX-Core: Functional braiding mandrel for the fast impregnation of hollow profiles
    SAMPE Europe Conference SEICO, Paris, 2012

  • Erber and Drechsler
    Damage Tolerant Drive Shafts with Integrated CFRP Flanges
    SAMPE, Seattle, 2012

  • Gnädinger, Härtel, Middendorf, Kuhlmann and Bauernhansl
    Design of multifunctional automotive structures using braiding technology
    Annual World Conference on Carbon, Krakow, 2012

  • Hafner, Weber, Graf and Middendorf
    Influence of laser processing on carbon fibres
    Laser Technology (SLT) Forum, Stuttgart, 2012

  • Härtel and Middendorf
    A multi-functional Test Rig
    Aachen Dresdner Textiltagung, Dresden, 2012

  • Härtel, Wagner, Middendorf and Fleischer
    Draping Strategies and Automation solutions for complex CFRP-Components
    SETEC, Lucerne, 2012

  • Liebau, van Campen, Sommer-Dittrich and Middendorf
    User- and Process-Defined Benchmark of Kinematic and FE-Draping Codes and Integration into the CAx Process Chain
    NAFEMS European Conference Multiphysics Simulation, Frankfurt, 2012

  • Middendorf, Erber and Carosella
    Flechttechnologie für composite Leichtbaustrukturen: auf dem Weg zur Serienfertigung
    Fertigungstechnisches Kolloquium, Stuttgart, 2012

  • Reden, Birkefeld, Vigoureux, Blanchard, Henke and Baumgart
    Development of an UD-Braided Longeron With Variable Cross Sections
    SAMPE EUROPE 33rd, Paris, 2012

  • Schumann, L.
    Flight Testing of the e-Genius aircraft
    Airbus e-Genius Day, Toulouse, 2012

  • Erber, Middendorf and Drechsler
    Automated Process Chains for Carbon Composites
    JEC Americas, Boston, Nov 2012

  • Schlipf, D., Rettenmeier, A., Haizmann, F., Hofsäß, M., Courtney, M. and Cheng, P.W.
    Model Based Wind Vector Field Reconstruction from Lidar Data
    German Wind Energy Conference (DEWEK), Bremen, Nov 2012

  • Würth, Rettenmeier, Schlipf, Cheng, Wächter, Rinn and Peinke
    Determination of Stationary and Dynamical Power Curves Using a Nacelle-based LIDAR System
    German Wind Energy Conference (DEWEK), Bremen, Nov 2012

  • Liebau, van Campen, Sommer-Dittrich and Middendorf
    On the Effect of Draping Strategy on FE-Based Draping Simulation of Basic and Complex 3D Geometries for Automated Preforming
    3rd Aircraft Structural Design Conference, Delft, Oct 2012

  • Sandner, Schlipf, Matha, Seifried, R and Cheng, P.W.
    Reduced Nonlinear Model of a Spar-Mounted Floating Wind Turbine
    German Wind Energy Conference DEWEK. Bremen, Germany, Oct 2012

  • Arnold and Cheng
    Fluid-Structure-Interaction on Tidal Current Turbines
    8th EAWE-PhD-Summerschool, Sep 2012

  • BeyerandCheng
    Dynamic Behaviour of Floating Offshore Wind Turbines
    8th PhD Seminar on Wind Energy in Europe, Zurich, Sep 2012

  • Liebau, van Campen, Sommer-Dittrich, Dölle and Middendorf
    An Approach for Investigating the complexity of an Automated Draping Process Using the Finite-Element Method
    European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Wien, Sep 2012

  • Matha, Sandner and Schlipf
    Efficient Critical Design Load Case Identification for Floating Offshore Wind Turbines with a Reduced Nonlinear Model
    The Science of Making Torque from Wind. Oldenburg, Sep 2012

  • Middendorf
    Research: Technology Trends in Composite Simulation
    Composite Technologies Symposium, Singapore, Sep 2012

  • Klett
    Isometrically folded structures in near net shape core applications
    ICSS10 - International Conference on Sandwich Structure, s, Aug 2012

  • Carosella
    Textile Preforming and its potential for automatisation
    IQPC Composite Manufacturing, Frankfurt, Jul 2012

  • Prieß and Middendorf
    Einfluss des Laserprozesses auf die Faser-Matrix-Anbindung beim Schneiden von Kohlenstofffasern
    2. CFK-Workshop am Institut für Strahlwerkzeuge, Stuttgart, Jul 2012

  • Middendorf, Jäger and Prowe
    Damage Tolerance of CFRP Airframe Structures: Criteria and Concepts
    DLR Bauweisen Kolloquium, Stuttgart, Jun 2012

  • Prieß, Hafner, Weber, Graf and Middendorf
    Influence of laser processing on carbon fibres
    Stuttgart Laser Technology (SLT) Forum, Stuttgart, June 2012

  • Rettenmeier, Anger, Bischoff, Hofsäß, Schlipf and Würth
    Nacelle-Based Lidar Systems
    Summer School:Remote Sensing for Wind Energy, Jun 2012

  • Carosella
    Tailored Fibre Placement - an option for automated high volume Preform Production
    Sampe Conference SEMAT, Munich, May 2012

  • Rettenmeier, Anger, Bischoff, Hofsäß, Schlipf, Würth and Cheng
    Development of Lidar wind measurement techniques
    RAVE International Conference, Bremerhaven, May 2012

  • Schlipf, Anger, Bischoff, Hofsäß, Rettenmeier, Würth, Siegmeier and Cheng
    Lidar Assisted Wind Turbine Control
    RAVE International Conference, Bremerhaven, May 2012

  • Carosella and Hoffmann
    Tailored Fibre Placement - Fasern strukturgerecht ablegen
    13. Textiltechnik Tagung, Chemnitz, Mar 2012

  • Carosella
    Tailored Fibre Placement - Merging stitching and fibre placement technologies
    ICS Europe, Paris, Mar 2012

  • Middendorf and Birkefeld
    Entwicklungstrends in der Faserverbund-Simulation
    Fachkongress Composite Simulation, Fellbach, Feb 2012

  • Beyer, Matha, Sebastian and Lackner
    Development, Validation and Application of a Curved Vortex Filament Model for Free Vortex Wake Analysis of Floating Offshore Wind Turbines
    50th AIAA Aerospace Sciences Meeting and Exhibit, USA, Jan 2012

  • Carosella and Hoffmann
    Das Tailored Fibre Placement Verfahren im Fokus des konstruktiven Leichtbaus
    automobil bw: TecNet Gruppe Leichtbau, Esslingen, Jan 2012

2011

  • Bender, Fischer and Drechsler
    Optimizing a Foldcore concerning density specific stiffness properties
    SEICO, Paris, 2011

  • Drechsler
    Automatisierte textile Vorformlingtechnologie
    Cluster-Treff, Industrielle Prozesskette Hochdruck-RTM bei der KraussMaffei Technologies GmbH, 2011

  • Erber
    Cost Efficient Manufacturing Process of CFRP Truck Side Member
    SAMPE EUROPE 32nd International Technical Conference, Paris, 2011

  • Feindler, Döll and Drechsler
    CFK in automobilen Crashstrukturen: Anforderungen, Dimensionierung und Simulation
    ATZlive, Werkstoffe im Automobilbau, 2011

  • Feindler, Drechsler and Döll
    Test method to analyse the energy absorption of composite material using flat coupon testing
    5th International Conference on Composites Testing and Model Simulation, Lausanne, 2011

  • Feindler, N., Fuhr, J., Böhler, P., Drechsler, K. and Döll, J.
    Simulation und Dimensionierung von energieabsorbierenden Faserverbundstrukturen für automobile Anwendungen
    NWC11 NAFEMS 2011, 2011

  • Fischer and Drechsler
    Aluminium Faltkerne für den Einsatz in Sandwichstrukturen
    Landshuter Leichtbau-Colloquium, Landshut, 2011

  • Kaiser, Weimer and Drechsler
    Automated impregnation of preforms for cost-effective manufacturing of fibre reinforced plastics
    CFK-Convention, Stade, 2011

  • Kittmann, Breeman and Schmollgruber
    The NACRE Innovative Evaluation Platform and its Navigation - Control Strategies
    SAE 2011 AeroTech Congress, Toulouse, 2011

  • Leutza, Kluepfelb, Dumontb, Hinterhoelzla, Drechsler and Weimer
    FE-Simulation of the Diaphragm Draping Process for NCF on a Macro-Scale Level
    14th International ESAFORM Conference on Material Forming ESAFORM, Belfast, 2011

  • Mildner, Dölle, Drechsler and Bjekovic
    Influence of reinforced metal structures using fibre reinforced plastics
    SAMPE EUROPE 32nd International Technical Conference, Paris, 2011

  • Nogueira, Drechsler, Hombergsmeier and Pacchione
    Investigation of a hybrid 3d-reinforced joining technology for lightweight structures
    16th International Conference on Composite Structures (ICCS 16), Porto, 2011

  • Nogueira, Drechsler, Hombergsmeier and Pacchione
    Investigation of the properties and failure mechanismus of a damage tolerant 3d-reinforced joint for lightweight structures
    Sampe Setec 11, Leiden, 2011

  • Pickett and Birkefeld
    Analysis and process simulation of textile structures
    SAMPE Technical Conference, Zürich, 2011

  • Seeger, Reese, Jonke, Englhart and Drechsler
    Cost effective manufacturing of molds for CFRP component production
    International Thermal Spray Conference (ITSC), Hamburg, 2011

  • Werchner, Havar and Drechsler
    Influence of design and loading on the mechanical behaviour of thick composite lugs
    DGLR Kongress, Bremen, 2011

  • Beyer, Sebastian, Matha and Lackner
    Curved Vortex Filaments in Free Vortex Wake Analysis of Floating Wind Turbines
    EWEA Offshore 2011, Niederlande, Nov 2011

  • Carosella, Birkefeld and Reden
    Entwicklung bis zur Serienumsetzung eines Handhabungsgerätes in Faserverbundbauweise
    Materialica Kongress, München, Oct 2011

  • Carosella
    Grundlagen der CFK-Herstellung
    1. Fachtagung CFK Bearbeitung, Stuttgart, Oct 2011

  • Prieß
    Injektions- und Infiltrationstechnologien für Faserverbundstrukturen
    1. CFK-Workshop am Institut für Strahlwerkzeuge (IFSW), Stuttgart, Sep 2011

2010

  • Beilstein, Drechsler and Rudolph
    Gewichtsabschätzungen von geklebten und geschweißten Strukturverbindungen im Flugzeugvorentwurf
    DLRK, Hamburg, 2010

  • Birkefeld, Erber and Drechsler
    Virtual Design Process for Braided Drive Shafts
    SAMPE SEICO Conference, Paris, 2010

  • Birkefeld, Pickett, Witzel and Drechsler
    Procedures for optimisation of structural composite aircraft profiles considering manufacturing constraints
    3rd EUCOMAS, Berlin, 2010

  • Clairmont, Drechsler, Erber and Härtel
    Automated handling of dry carbon and prepreg materials for the serial production for aeronautical and automotive applications
    SAMPE Europe SEMAT, München, 2010

  • Drechsler and Klett
    Technical Tessellations - Hidden Beauties
    5OSME Conference, Singapore, 2010

  • Drechsler
    Carbon Composites in Süddeutschland - Eine Region entwickelt sich zum europäischen High-tech-Standort
    9. Innovation Panel, Meitingen, 2010

  • Drechsler
    CFK - der Automobilwerkstoff der Zukunft?
    Internationaler VDI-Kongress Kunststoffe im Automobilbau, Stuttgart, 2010

  • Drechsler
    Funktionsintegrierter Leichtbau
    9. Symposium Material Innovativ, Augsburg, 2010

  • Drechsler
    Was kann man von anderen Märkten lernen?
    CCeV Automotive Forum, Nackarsulm, 2010

  • Erber, Bulat, Köber, Ménager and Drechsler
    Development and Test of CFRP Secondary Structures Manufactured by Innovative Textile Preforming Technologies
    31. SAMPE Europe Conference, Paris, 2010

  • Erber, Weng and Drechsler
    Effect of Designed Yarn Damages on the Out-of-Plane Properties of Braided Composite Parts
    10 TexComp Conference, 2010

  • Goraj, Kittmann, Voit-Nitschmann and Szender
    Design and integration of Flexi Bird - a low cost sub scale research aircraft for safety and environmental issues
    27th International congress of the aeronautical sciences, Nice, 2010

  • Goraj, Kittmann, Voit-Nitschmann and Szender
    Design and integration of Flexi-bird- a low cost sub-scale research aircraft for safety and environmental issues
    ICAS, Cancún, 2010

  • Grzeschik and Drechsler
    Experimental studies on folded cores
    9th International Conference on Sandwich Structures, Los Angeles, 2010

  • Härtel, Erber and Drechsler
    Development and Testing of a Lightweight CFRP Ka-Band Antenna for Space Applications
    SAMPE, Paris, 2010

  • Härtel, Erber, Drechsler, Lengowski, Beyermann and Röser
    Development and testing of a lightweight CFRP KA-Band antenna for space applications
    JEC, Paris, 2010

  • Kehrle
    Forschung und Entwicklung von Faserverbund- und Sandwichleichtbau im Flugzeug- und Automobilbau
    VDI Stuttgart, Germany., 2010

  • Kehrle
    Leichtbauplatten mit Foldcore Kernen
    Möbelleichtbau-Symposium, Lemgo, 2010

  • Kehrle
    Leichtbausandwichwerkstoffe
    Yachtbau Symposium, Hamburg, 2010

  • Reden, Becker and Drechsler
    Design and Energy Transmission for an Electronic Controlled Lace Bobbin
    SETEC 10, Brindisi, 2010

  • Reden, Bulat and Drechsler
    Mechanical Performance of Hybrid Carbon Glass Fibre Braids with a High Ratio of 0°-Fibres
    10 TexComp Conference, 2010

  • Rudolph, Fuhr and Beilstein
    A validation method using design languages for weight approximation formulae in the early aircraft design phase
    EUCOMAS, Mannheim, 2010

  • Werchner, Havar and Drechsler
    Design Guidelines and Analysis Methods for Composite Load Introduction Structures
    Simulia Konferenz, Heidelberg, 2010

  • Carosella
    Tailored Fibre Placement - Über- und Ausblick auf eine prosperierende Textiltechnologie
    Fachtagung Technisches Sticken- zwischen Forschung und Markt, Plauen, Sep 2010

2009

  • Drechsler
    Leichtbaupotential von Faserverbundwerkstoffen im Maschinenbau
    IHK Innovationspodium, Augsburg, 2009

  • Erber, Beyersdorff and Drechsler
    Neue Gesamtkonzepte und Fertigungstechnologien für FVK-Druckwalzen
    Composites in Automotive and Aerospace Kongress, Materialica, 2009

  • Erber, Birkefeld and Drechsler
    The Influence of Braiding Configuration on Damage Tolerance of Drive Shafts. 30
    SAMPE Europe Conference, Paris, 2009

  • Erber, Gittel, Geiger, Chaudhari, Henning and Drechsler
    Advanced Damage Tolerance of CFRP Laminates using In-Situ Polymerised Thermoplastics
    SAMPE Europe Technical Conference, Filton, 2009

  • Fischer, Grzeschik and Drechsler
    Experimental and numerical parameter study of foldcores
    Vortrag auf der Sampe Europe Technical Conference, Bristol, 2009

  • Fischer, Grzeschik and Drechsler
    Potential of high performance foldcores made out of Peek
    SETEC Europe, Bristol, 2009

  • George, Drechlser and Holmberg
    The Permeability of Carbon Fiber Preforming Materials: Sensitivity to Fabric Geometry
    20th Annual International SICOMP Conference, Piteå, 2009

  • George, Drechlser and Holmberg
    The Permeability of Tackified, Stitched, and Braided Carbon Fiber Textiles: Experi-mental Characterization and Design Modeling
    SAMPE, Baltimore, 2009

  • Grave, Birkefeld, Reden, Drechsler, Kyosev and Rathjens
    Simulation of 3D overbraiding - Solutions and Challenges
    Second World Conference on 3D Fabrics and their Applications, Greenville, 2009

  • Johnson, Kilchert, Fischer and Kehrle
    New structural composite core materials
    Composites, Gold Coast, 2009

  • Kehrle
    Chancen durch Faserverbundwersktoffe im Anlagenbau - Potenziale und Risiken
    CCe.V. Augsburg, Germany., 2009

  • Kehrle
    Faserverbundwerkstoffe
    IHK, Reutlingen, 2009

  • Kehrle
    Sandwichbauweisen in der Luftfahrt
    Leichtbaukolloquium, Landshut, 2009

  • Klett and Drechsler
    Cutting edge cores: Multi- functional Core Structures
    DGLR Jahrestagung, 2009

  • Klett, Drechsler, Kehrle and Fach
    Cutting Edge Cores: Multifunktionale Faltkernstrukturen
    4. Landshuter Leichtbau-Colloquium, Landshut, 2009

2008

  • Bulat
    Textile technology as an innovative manufacturing method for highperformance fibre composite structures
    4th International Textile, Dubrovnik, 2008

  • Carosella
    Sticken ein textiles Preformverfahren
    2. CFK Technologietag Airbus, Hamburg, 2008

  • Carosella
    The Forefront of Textile Composite Research in Europe
    Aerospace Industrial Technology Show, Nagoya, 2008

  • Erber
    Flechttechnologie - Kostenoptimiertes Fertigungsverfahren für Faserverbundbauteile
    CFK-Technologietag, Hamburg, 2008

  • Fischer and Drechsler
    Aluminium foldcores for sandwich structure application
    CompTest, 2008

  • Fischer and Drechsler
    Aluminium Foldcores for Sandwich Structure Application. Cellular Metals for Structural and Functional Applications
    CELLMET, 2008

  • Fischer, Drechsler, Kilchert and Johnson
    Mechanical tests for foldcore base material properties
    CompTest, 2008

  • Klett and Drechsler
    Cutting edge cores: Aerospace and origami
    9th International Mathematica Symposium, Maastricht, 2008

  • Klett and Drechsler
    Cutting-Edge Cores - Origami Meets Aerospace
    International Mathematica User Conference, Champaign, 2008

  • Kunze, Wellhausen, Leistner, Demel, Roser and Drechsler
    Entwicklung von Faserverbund-Hohlbauteilen in RTM-Bauweise am Beispiel eines Traglenkers von Passagierflugzeugtüren
    Proc. Deutscher Luft- und Raumfahrtkongress, Darmstadt, 2008

  • Trittler, Fichter, Voit-Nitschmann and Kittmann
    Preliminary System Identification of the Blended Wing Body Flight Demonstrator VELA2 from Flight Data
    AIAA Atmospheric Flight Mechanics Conference, Honolulu, 2008

  • Wagner, Bansemir and Drechsler
    Verhalten unterschiedlicher FVW-Bauweisen und Fertigungstechniken unter Schlagbelastung
    Deutscher Luft- und Raumfahrtkongress, Darmstadt, 2008

2007

  • Beilstein and Drechsler
    A methodology of weight prediction for joints in aircraft design
    SAWE, Madrid, 2007

  • Breckweg, Meyer, Drechsler and Rüger
    Fast and Intuitive Robot Programming for Mandrel Guiding of Braiding Machines for Textile Preforming
    International European SAMPE Conference, Paris, 2007

  • Drechsler and Friedrich
    Wege zur kostengünstigen Fertigung von Hochleistungsverbundstrukturen in innovativen Fahrzeugkonzepten
    Handelsblattsymposium „ Werkstoffe und Fertigungstechnik, Technologien und Bauweisen“, Stuttgart, 2007

  • Kaiser, Garschke, Fox, Weimer and Drechsler
    Out of Autoclave Manufacture of Structural Aerospace Composite Materials
    International European SAMPE Conference, Paris, 2007

  • Klett, Y. and Drechsler, K.
    Design of Multifunctional Folded Core Structures for Aerospace Sandwich Applications
    1st CEAS European Air and Space Conference, 2007

  • Klett, Kehrle, Drechsler and Carosella
    High Tech Origami
    Composite Days, Innsbruck, 2007

  • Kümpers, Brockmanns, Drechsler and Rüger
    Cost Effective Manufacturing of complex textile preforms by automated braiding technologies
    International European SAMPE Conference, Paris, 2007

  • Moncayo, Wagner and Drechsler
    Numerical Simulation of Low Velocity Impact Delamination in Composite Materials
    CanCom, Montreal, 2007

  • Stüve, Gries, Drechsler, Witzel, Miravete and Tolosana
    Simulation of braiding technology along the complete process chain
    International European SAMPE Conference, Paris, 2007

  • Voit-Nitschmann, Schumann and Geinitz
    HYDROGENIUS: FLYING WITH HYDROGEN
    Workshop of Aircraft System Technologies AST 2007, Hamburg., 2007

  • Wagner, Bansemir, Drechsler and Weimer
    Impact Behaviour and Residual Strength of Carbon Fiber Textile based Materials
    3rd SAMPE Europe Technical Conference, Madrid, 2007

2006

  • Aoki, Kensche, Eberle, Wagner, Keilig and Drechsler
    NDE Assessment of Long Fibre Reinforced GFRP and CFRP
    Conference on “Damage and its evolution in fibre composite materials”, Stuttgart, 2006

  • Drechsler, Herkt, Less and Riedel
    Dynamic testing of 3D-reinforced composite T-joints
    ICAS, Hamburg, 2006

  • Drechsler, Herkt, Middendorf, Less and Riedel
    3D-reinforcement of composite T-joints by means of robot assisted stitching technologies
    SAMPE International, Long Beach, 2006

  • Drechsler and Karb
    Design and Performance of Composite Structures made by Tailored Fibre Placement Technology
    SAMPE International Conference, Long Beach, 2006

  • Drechsler, Kehrle and Kolax
    Folded Core Sandwich Structures for advanced next generation fuselage concepts
    SAMPE Europe Technical Conference, Toulouse, 2006

  • Drechsler, K., Kehrle, R, Klett, Y., Thorsteinsson and E
    Faltwabenkerne für multifunktionale Leichtbaustrukturen
    2nd MATERIALICA Composites Congress Composites in Automotive Aerospace, München, 2006

  • Drechsler, Schouten and Havar
    3D reinforcement improving interlaminar shear and peel strength for composites loops
    International European SAMPE Conference, Paris, 2006

  • Drechsler and Wagner
    Fatigue Behavior and Residual Strength of Textile Based Materials
    Conference on “Damage and its evolution in fibre composite materials”, Stuttgart, 2006

  • Drechsler
    Chancen für CFK im Automobil- und Flugzeugbau durch integrierte Fertigungstechnik
    Bayern Innovativ Symposium Polymere im Automobilbau, München, 2006

  • Drechsler
    Leichtbau in Natur und Technik
    HIN Kolloquium, Neckarsulm, 2006

  • Drechsler
    Origami-like Sandwich Structures for Aerospace Applications
    SAMPE International Conference, Long Beach, 2006

  • Feher, Drechsler and Filsinger
    Development of a Modular 2,45 GHz HEPHAISTOS-CA2 Microwave Processing System for Automated Composites Fabrication
    International European SAMPE Conference, Paris, 2006

  • Palacin and Drechsler
    The Marie Curie Program Momentum - Composites in Transport
    International European SAMPE Conference, Paris, 2006

  • Pfleiderer, Wagner, Drechsler and Busse
    Application and potential of emerging NDE-methods for carbon fibre reinforced composites
    Proceedings 27th Sampe Europe Conference, Paris, 2006

  • Weis, Hoflin, Deimel, Bilgram and Drechsler
    Damage Detection Using Fibre Bragg Grating Sensors
    Proceedings of the European Conference on Non Destructive Testing, Berlin, 2006

2005

  • Drechsler and Gessler
    Textile Fertigungsverfahren für optimierte Faserverbundstrukturen
    WING-Konferenz, Aachen, 2005

  • Drechsler and Keilig
    Schädigungscharakterisierung an NCF-Laminaten mittels Lockin-Thermographie und Bestimmung der CAI-Restfestigkeiten
    1.Kunststoffkolloqium, Stuttgart, 2005

  • Drechsler
    Leichtbau im Fahrzeug
    Euroforum-Konferenz, München, 2005

  • Drechsler
    Neueste Entwicklungen der Faserverbundtechnologie für den Flugzeug- und Automobilbau
    Vortrag VDI Arbeitskreis Produktionstechnik, Stuttgart, 2005

  • Drechsler
    Origami and aerospace - a new approach for sandwich structures
    Keynote presentation at International SAMPE Conference, Tokyo, 2005

  • Havar and Drechsler
    3D Fibre Reinforcement improving interlaminar shear and peel strength of composite loops
    SAMPE, Paris, 2005

  • Kehrle and Drechsler
    Manufacturing and performance of folded honeycomb structures
    SAMPE, Long Beach, 2005

  • Kehrle and Drechsler
    Manufacturing, Simulation and performance of sandwich structures with folded core
    25th International SAMPE Conference, Paris, 2005

  • Kehrle and Pfaff
    Mechanische Eigenschaften neuartiger Sandwichkerne
    6. Nationales Symposium SAMPE, Stuttgart, 2005