Herr Dipl.-Ing., Msc
Vasilis Pettas
wissenschaftlicher Mitarbeiter

Dieses Bild zeigt  Vasilis Pettas
Telefon 0049 711 685-67268
Telefax0049 711 685-68293
Universität Stuttgart
Institut für Flugzeugbau
Allmandring 5B
70569 Stuttgart


Publications in Peer Reviewed Journals including IOP Conference Series

 [5] V. Pettas and P. W. Cheng, “Down-regulation and individual blade control as lifetime extension enablers”, J. Phys. Conf. Ser., vol. 1102, p. 012026, Oct. 2018. DOI: 10.1088/1742-6596/1102/1/012026

[4] M. S. Khaniki, D. Schlipf, and V. Pettas, “Control Design For Disturbance Rejection in Wind Turbines”, in 2018 Annual American Control Conference (ACC), 2018, pp. 1515–1519. DOI: 10.23919/ACC.2018.8431637

[3] V. Pettas, M. Salari, D. Schlipf, and P. W. Cheng, “Investigation on the potential of individual blade control for lifetime extension”, J. Phys. Conf. Ser., vol. 1037, p. 032006, Jun. 2018. DOI: 10.1088/1742-6596/1037/3/032006

[2] V. Pettas, T. Barlas, D. Gertz, and H. A. Madsen, “Power performance optimization and loads alleviation with active flaps using individual flap control”, J. Phys. Conf. Ser., vol. 749, no. 1, p. 012010, Sep. 2016..   DOI: 10.1088/1742-6596/749/1/012010

[1] T. Barlas, V. Pettas, D. Gertz, and H. A. Madsen, “Extreme load alleviation using industrial implementation of active trailing edge flaps in a full design load basis”, J. Phys. Conf. Ser., vol. 753, no. 4, p. 042001, Sep. 2016. DOI: 10.1088/1742-6596/753/4/042001

Publications in Conference Proceedings and Seminars

[2] V. Pettas and P. W. Cheng, “Control methods for lifetime extension”, Offshore R&D Conference 2018, Bremerhaven, Germany, Nov. 2018

[1] V. Pettas and P. W. Cheng, “Retrofit control concepts for lifetime extension”, 14 th EAWE PhD Seminar on Wind Energy, Brussels, Belgium, Sep. 2018  



2002-2012 Diploma in Mechanical Engineering, National Technical University of Athens (NTUA)
  Diploma thesis: “Numerical investigation of the effects on the flow of the internal configuration of the injection system of a Pelton impulse hydroturbine”
2014-2016 Master of science in Wind Energy, Denmark’s Technical University (DTU)
  Msc Thesis: “Investigation of ATEflap potential in load alleviation and maximizing energy yield for large wind turbine rotors”
2015-2016 Engineering Intern at Siemens Wind Power, Loads and Validation team in Copenhagen
Since 2/2017 Research assistant at Stuttgart Wind Energy Institute at Stuttgart University