This image shows Tristan Schlotthauer

Tristan Schlotthauer

Mr. M.Sc.

Wissenschaftlicher Mitarbeiter
Institut für Flugzeugbau

Contact

+49 711 685 60796
+49 711 685 62449

Pfaffenwaldring 31
70569 Stuttgart
Deutschland
Room: 5.529

Subject

  1. Baranowski, M., Netzer, M., Gönnheimer, P., Coutandin, S., Fleischer, J., Schlotthauer, T., & Middendorf, P. (2022). Functional Integration of Subcomponents for Hybridization of Fused Filament Fabrication. International Journal of Mechanical Engineering and Robotics Research, 319--325. https://doi.org/10.18178/ijmerr.11.5.319-325
  2. Mesarosch, F., Schlotthauer, T., Springmann, M., Schneider, J., & Middendorf, P. (2022). Topology Optimization and Production of a UAV Engine Mount Using Various Additive Manufacturing Processes. In J. Rieser, F. Endress, A. Horoschenkoff, P. Höfer, T. Dickhut, & M. Zimmermann (Hrsg.), Proceedings of the Munich Symposium on Lightweight Design 2021 (S. 124--135). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-65216-912
  3. Schlotthauer, T., & Middendorf, P. (2021). Hollow stereolithographic structures reinforced by short carbon fibres. In JEC Composite Magazine (Bd. 143, S. 21--24).
  4. Schlotthauer, T., Nitsche, J., & Middendorf, P. (2021). Evaluation of UV post-curing depth for homogenous cross-linking of stereolithography parts. Rapid Prototyping Journal, ahead-of-print(ahead-of-print), Article ahead-of-print. https://doi.org/10.1108/RPJ-12-2020-0309
  5. Springmann, M., Schlotthauer, T., Peter, A., Altmann, H., Musso, J., & Middendorf, P. (2021, März). Identifikation geeigneter Photopolymerezur Verarbeitung in Zwei-Photonen-SLA-Verfahren. 27. Stuttgarter Kunststoffkolloquium.
  6. Baranowski, M., Schlotthauer, T., Netzer, M., Gönnheimer, P., Coutandin, S., Fleischer, J., & Middendorf, P. (2021, März). Hybridization of Fused Filament Fabrication Components by Stereolithographic Manufactured Thermoset Inserts. ICMEP 2021 - The 10th International Conference on Manufacturing Engineering and Processes. https://doi.org/10.1007/978-981-16-3934-01
  7. Schlotthauer, T., Geitner, A., Seifarth, C., Schendel, O., Lück, T., Kaindl, R., Kopp, D., Spalt, S., Walter, P., Nolan, D., & Middendorf, P. (2021, September). Reinforcement of stereolithographic manufactured structures by the subsequent infusion of short carbon fibers. SAMPE Europe Conference.
  8. Schlotthauer, T., Nolan, D., & Middendorf, P. (2021). Influence of short carbon and glass fibers on the curing behavior and accuracy of photopolymers used in stereolithography. Additive Manufacturing, 42, 102005. https://doi.org/10.1016/j.addma.2021.102005
  9. T. Schlotthauer, S. R. Raisch, A. Dorneich, T. Heckner, T. Mohr, & P. Middendorf. (2021, März). Teilindividualisierte und nachverfolgbare Spritzgussbauteile durch In-situ-Anbindung additiv hergestellter Subkomponenten. 27. Stuttgarter Kunststoffkolloquium.
  10. Kaindl, R., Kopp, D., Spalt, S., Schlotthauer, T., Seifarth, C., Schendel, O., Lück, T., Walter, P., Nolan, D., Lackner, J., & Waldhauser, W. (2021, September). Friction- and wear-reducing atmospheric pressure plasma molybdenum disulfide -- graphite coatings on fibre-reinforced composites manufactured by stereolithography. EUROMAT.
  11. Schlotthauer, T. (2020, Oktober). Stereolithografie-Materialien, Prozesse und Plasma-Nachbehandlungsverfahren für dauerbeständige Automobilanwendungen. Technologiegespräch Materialinnovationen für die additive Fertigung.
  12. Nitsche, J., Schlotthauer, T., Hermann, F., & Middendorf, P. (2020, Oktober). Experimental and theoretical study on depth of cure during UV post-curing of photopolymers used for additive manufacturing. SCAP 2020 - Stuttgart Conference on the Automotive Production. https://doi.org/10.1007/978-3-662-62962-840
  13. T. Schlotthauer, & P. Middendorf. (2019, März). Prozessgrenzen bei der stereolithografischen Herstellung von Kohlenstoff-kurzfaserverstärktem Kunststoff. 26. Stuttgarter Kunststoffkolloquium.
To the top of the page