Conference Contributions
2018
- Lemmer, F., Yu, W., Chaudhari, Pegalajar-Jurado, A., Borg, M., Mikkelsen, R.F. and Bredmose, H.
The TripleSpar campaign: Validation of a reduced-order simulation model for floating wind turbines
ASME 37th International Conference on Ocean, Offshore and Arctic Engineering, Jun 2018 - Vittori, F., Bouchotrouch, F., Lemmer, F. and Azcona, J.
Hybrid scaled testing of a 5MW floating wind turbine using the SIL method compared with numerical models
ASME 37th International Conference on Ocean, Offshore and Arctic Engineering, Madrid, Spain, Jun 2018
2017
- Draskovic, M., Pickett, A., Carosella, S., Kärger, L., Henning, F. and Middendorf, P.
Accelerated Residual Strength After Fatigue Testing Using In-Situ Image Processing for Damage Detection
SAMPE Conference 2017, Stuttgart, Nov 2017 - Faerron Guzmán, R., Lemmer, F., Yu, W., Müller, K., Borisade, F. and Cheng, P.W.
Current research on simulations of floating offshore wind turbines
35. CADFEM ANSYS Simulation Conference, Koblenz, Nov 2017 - Helber, F., Schrick, B., Carosella, S. and Middendorf, P.
Tailored Preform Production with Customizable UD Materials for Hybrid Material Design
SAMPE Conference 2017, Stuttgart, Nov 2017 - Michaelis, D. and Middendorf, P.
Tensile Testing of Biaxially Braided Carbon Composites
SAMPE Conference 2017, Stuttgart, Nov 2017 - Muhs, F. and Middendorf, P.
Mechanical Performance of Curved Sandwich Foldcores
SAMPE Conference 2017, Stuttgart, Nov 2017 - Lay, J.
Hybridisierungskonzepte mit der heutigen Technologie
e²-Symposium - Emissionsfreies und elektrisches Flugsymposium, Stuttgart, Oct 2017 - Schumann, L.
Hybrid-Elektro-Pendlerflugzeuge - eine geeignete Anwendung im kommerziellen Luftverkehr
e²-Symposium - Emissionsfreies und elektrisches Flugsymposium, Stuttgart, Oct 2017 - Strohmayer, A.
Eco4: Hybridelektrische Viersitzflugzeuge der neuen Generation
e²-Symposium - Emissionsfreies und elektrisches Flugsymposium, Stuttgart, Oct 2017 - Dittmann, J. and Middendorf, P.
Numerische Permeabilitätsvorhersage von textilen RTM-Preforms
CC Austria, RTM - Next Steps, Friedrichshafen, Sep 2017 - Fernández, D., Begemann, B., Middendorf, P. and Horst, P.
Untersuchung des Beul- und Tragverhaltens von Selektiv Genähten, Versteiften FKV-Paneelen unter Mehraxialer Belastung
66. Deutscher Luft- und Raumfahrtkongress, München, Sep 2017 - Heudorfer, K., Engelfried, M., Fial, J., Carosella, S. and Middendorf, P.
Investigation of a New out of Autoclave Placement Process, Mould Concepts/Release Strategies and Reusable Heated Bagging Material
7th EASN International Conference, Warsaw, Poland, Sep 2017 - Lay, J.
Hybrid-Electric Flight – what are we waiting for?
7th EASN International Conference, Warsaw, Poland, Sep 2017 - Strohmayer, A.
Turning Icaré II into a test platform – will the modifications affect aeroelasticity?
7th EASN International Conference, Warsaw, Poland, Sep 2017 - Dittmann, J., Hügle, S., Seif, P., Kauffmann L. and Middendorf, P.
Permeability Prediction Using Porous Yarns in a Dual-Scale Simulation with Openfoam
ICCM21 - 21st International Conference on Composite Materials, Xi'an, China, Aug 2017 - Sommer, D. and Silak, I.
Untersuchung von hybriden Klebeverbindungen während des Aushärteprozesses in einem gläsernen Ofen
CCeV Engineering/Klebtechnik/NDE, Augsburg, Jul 2017 - Lemmer, F., Müller, K., Yu, W., Schlipf, D. and Cheng, P.W.W.
Optimization of floating offshore wind turbine platforms with a self-tuning controller
International Conference on Ocean, Offshore & Arctic Engineerin, Trondheim, Norway, Jun 2017DOI
- Schwingel, J., Baz, S., Wellekötter, J. and Carosella, S.
Resource and Energy Efficient Manufacturing of Automotive Lightweight Parts Made of Recycled Material
BW Forschungstag 2017, Stuttgart, Jun 2017 - Böhler, P., Dittmann, J., Michaelis, D., Middendorf, P. and Liebold, C.
Manufacturing Simulation as Part of the Digital Prototype
11th European LS-DYNA Conference 2017, Salzburg, Austria, May 2017 - Poppe, C., Fial, J., Kräger, L., Carosella, S., Zimmerling, C., Albrecht, F., Draskovic, M., Engelfried, M., Middendorf, P. and Henning, F.
Zeit- und kosteneffiziente Prozess- und Produktentwicklung für den Hochleistungs-Faserverbundleichtbau mittels Nasspresstechnologie
4. Technologietag Hybrider Leichtbau, Stuttgart, May 2017 - Schrick, B. and Carosella, S.
Anlagentechnik für Maßgeschneiderte Preform Konstruktion und Produktion
4. Technologietag Hybrider Leichtbau, Stuttgart, May 2017 - Draskovic, M., Pickett, A. and Middendorf, P.
Influence of Ply Waviness on the Residual Strength After Fatigue in GFRP - Comparison of Localized and Uniform Defects
8th International Conference on Composites Testing and Model Identification, Leuven, Belgium, Apr 2017 - Engelfried, M., Fial, J., Tartler, M., Böhler, P., Hägele, D. and Middendorf, P.
A Mesoscopic Approach for Draping Simulation of Preforms Manufactured by Direct Fibre Placement
20th International ESAFORM Conference on Material Forming, Dublin, Ireland, Apr 2017 - Facciotto, S., Dittmann, J., Pickett, A. and Middendorf, P.
Characterization and Modelling of Local Compaction Effect on Permeability in Infusion Processes
8th International Conference on Composites Testing and Model Identification, Leuven, Belgium, Apr 2017 - Neumann, A., Pickett, A. and Middendorf, P.
Finite Element and Experimental Stress Analysis of Laminated Composite Compression Specimens
8th International Conference on Composites Testing and Model Identification, Leuven, Belgium, Apr 2017 - Bauer, F., Middendorf, P., Kempf, M. and Weiland, F.
Basalt Fiber Reinforced Composites for Elevated Application Temperatures
25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017 - Dittmann, J., Dollinger, F., Kaufmann L. and Middendorf, P.
Numerical Permeability Prediction with OpenFOAM
25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017 - Gnädinger, F., Middendorf, P. and Fox, B.
Influence of Carbon Fibre Sizings and Matrix Resins on Fibre-Matrix Adhesion: Flexure and Shear Measurements of CFRP-Laminates
25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017 - Heudorfer, K., Carosella, S. and Middendorf, P.
Compression Wet Moulding as Alternative to RTM
25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017 - Szcesny, M., Heudorfer, K., Middendorf, P., Blumrich, R., Riegel M. and Wiedemann, J.
Design, Manufacturing and Application of Carbon Fiber Reinforced Airfoils Used to Create Turbulence and Gusts in a Vehicle Wind Tunnel
25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017 - Wellekötter, J., Bonten, C., Baz, S., Gresser, T., Schwingel, J. and Middendorf, P.
Resource-Efficient Lightweight Design Due to New Recycling Concept
25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017 - Wolfinger, B., Carosella, S. and Middendorf, P.
Complex Carbon/PA6 Hybrid Yarn Structures Made by Tailored Fibre Placement
25. Stuttgarter Kunststoffkolloquium, Stuttgart, Mar 2017
2016
Comparative Analysis of Industrial Design Methodologies for Fixed-Bottom and Floating Wind Turbines
2016 ASME. ISBN: 978-0-7918-4997-2- Michaelis, D.
Prüfverfahren von CFK-Geflechten
CCeV Thementag Flechten, Stuttgart, Dec 2016 - Schwingel, J.
Resource and Energy Efficient Manufacturing of Automotive Lightweight Parts Made of Recycled Material
International Textile Conference 2016 (Aachen-Dresden-Denkendorf), Dresden, Nov 2016 - Dittmann, J., Böhler, P., Michaelis, D. and Middendorf, P.
DigitPro – Aufbau eines digitalen Prototyps für den industriellen Großeinsatz 4.0
NAFEMS Seminar - Simulation von Composites – Bereit für Industrie 4.0, Hamburg, Oct 2016 - Dittmann, J. and Middendorf, P.
ARENA2036 – Above-and-Beyond
LS-Dyna User Forum, Bamberg, Oct 2016 - Middendorf, P.
DigitPro: Ganzheitlicher digitaler Prototyp für industriellen FVK-Leichtbau
Forel Kolloquium, Oct 2016 - Klett, Y., Muhs, F. and Middendorf, P.
Behavior of Congruent Tessellation Stacks Under Torsional Loading
ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2016), Charlotte, USA, Aug 2016 - Dittmann, J., Hügle, S. and Middendorf, P.
Numerical 3D Permeability Prediction Using Computational Fluid Dynamics Techniques
FPCM - 13th Internation Conference on Flow Processes in Composite Materials, Kyoto, Japan, Jul 2016 - Dittmann, J., Michaelis, D., Böhler, P. and Middendorf, P.
DigitPro - Validating The Link Between Braiding Simulation, Infiltration and Mechanical Testing
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Dittmann, J. and Middendorf, P.
DigitPro - Ganzheitlicher digitaler Prototyp im Leichtbau für die Großserienproduktion
Fachtagung Wissenschaft und Wirtschaft nachhaltig vernetzen, Berlin, Jun 2016 - Engelfried, M., Nosek, T., Heieck, F., Böhler, P. and Middendorf, P.
Lowflip - Draping Simulation of Prepregs at Mesoscopic and Macroscopic Level
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Fial, J., Böhler, P. and Middendorf, P.
Advanced Forming of Tailored Textiles Using Locally Modified Properties for Optimized Lightweight Structures
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Gizik, D., Metzner, C. and Middendorf, P.
Spreading of Heavy Tow Carbon Fibers for the use in aircraft structures
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Heieck, F. and Middendorf, P.
Effect of the Cover Factor of 2D Biaxial and Triaxial Braided Carbon Composites on Their In-Plane Mechanical Properties
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Koch, C., Lemmer, F., Borisade, F., Matha, D. and Cheng, P.W.
Validation of INNWIND.EU scaled model tests of a semisubmersible floating wind turbine
International Ocean and Polar Engineering Conference, Rhodos, Greece, Jun 2016DOI
- Michaelis, D. and Middendorf, P.
Characteristic Load Cases of Biaxial Braids
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Muhs, F., Klett, Y. and Middendorf, P.
Influence of Geometry and Base Material on the Compressive Properties of Foldcores
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Sachse, R., Pickett, A.K., Gnädinger, M. and Middendorf, P.
Mechanisms to Arrest a Crack in the Adhesive Bondline of Fatigue Loaded CFRP-Joints Using a Rivetless Nutplate Joint
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Tartler, M., Hägele, D., Fial, J., Engelfried, M., Karb, I. and Middendorf, P.
Investigation and Simulation of Forming Behaviour of Preforms Made by Direct Fibre Placement
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Zink, D., Awe, C. and Middendorf, P.
Automated Design Approach and Potential Assessment of Composite Structures: Fast Analytical Engineering Tool for Multiple Load Cases
ECCM17 17th European Conference on Composite Materials, Munich, Jun 2016 - Meiler, S., Fey, P., Kreutzbruck, M., Draskovic, M. and Middendorf, P.
Nondestructive Testing of CFRP with Thermoplastic Matrix
ANTEC, Indianapolis, USA, May 2016 - Vinot, M., Holzapfel, M., Michaelis, D., Dittmann, J., Böhler, P., Middendorf, P. and Liebold, C.
Numerische Prozesskette für die Auslegung von geflochtenen Fahrzeugkomponenten - Nutzen und Herausforderungen
Symposium Faszination Hybrider Leichtbau, Wolfsburg, May 2016 - Blandl, M.
Development of an Alternative Method for Fiber Impregnation
EPTA - 13th World Pultrusion Conference, Prague, Czech Republic, Mar 2016 - Carosella, S.
Recent Developments and Research Results regrading TFP-Technology at the Institute of Aircraft Design
CCeV Thementag Tailored Fiber Placement, Dresden, Mar 2016 - Middendorf, P., Michaelis, D., Böhler, P., Dittmann, J. and Heieck, F.
ARENA2036 - DigitPro: Development of a Virtual Process Chain
16th Stuttgart International Symposium on Automotive and Engine Technology, Stuttgart, Mar 2016 - Luhmann, B., Borisade, F., Raach, S. and Cheng, P.W.
Coupled Aero-Elastic Multi-Body Simulation of Two-Bladed Wind Turbines in Wind Park Arrays
AIAA conference, San Diego, USA, Jan 2016
2015
- Dittmann, J., Böhler, P., Michaelis, D., Vinot, M., Liebold, C., Fritz, F., Finckh, H. and Middendorf, P.
DigitPro - Digital Prototype Build-up Using the Example of a Braided Structure
2. International Merge Technologies Conference, Chemnitz, 2015 - Dittmann, J.
Permeabilitätsbestimmung und der Weg zu aussagekräftigen Füllsimulationen
AFBW AG Simulation, Fellbach, 2015 - Middendorf, P., Böhler, P., Dittmann, J., Michaelis, D. and Heieck, F.
DigitPro - Holistic digital prototype for lightweight design in large-scale production
JEC Singapore, Singapore, 2015 - Middendorf, P., Sommer-Dittrich, T., Böhler, P., Dittmann, J., Michaelis, D., Heieck, F. and Zuleger, S.
Forschungscampus ARENA2036 - Leichtbau durch Funktionsintegration und Aufbau einer digitalen Prozesskette
ATZ Tagung, Stuttgart, 2015 - Sachse, R., Pickett, A.K., Käß, M. and Middendorf, P.
Numerical Simulation of Fatigue Crack Growth in the Adhesve Bondline of Hybrid CFRP Joints
COMPOSITES 2015, Bristol, 2015 - Fürst, H., Schlipf, D., Latour, M.I. and Cheng, P.W.
Design and evaluation of a lidar-based feedforward controller for the INNWIND.EU 10 MW wind turbine
European Wind Energy Association Annual Event (EWEA), Paris, France, Nov 2015 - Lay, J., Schumann, L., Geiß, I. and Strohmayer, A.
Electric and Hybrid Aircraft - Current Research at the University of Stuttgart
10th AirTec, Munich, Nov 2015 - Schlipf, D., Fleming, P., Raach, S., Scholbrock, A., Haizmann, F., Krishnamurthy, R., Boquet, M. and Cheng, P.W.
An adaptive data processing technique for lidar-assisted control to bridge the gap between lidar systems and wind turbines
European Wind Energy Association Annual Event (EWEA), Paris, France, Nov 2015 - Wortmann, S., Haizmann, F., Geisler, J. and Konigorski, U.
Comparison of Feedback and Ideal and Realistic Lidar-Assisted Feedforward Individual Pitch Control
Scientific Track of European Wind Energy Association Annual Event (EWEA), Paris, France, Nov 2015 - Beyer, F. and Cheng, P.W.
Load Simulation of Offshore Wind Turbines - Modeling Techniques and Validation by Measurements
SIMPACK Wind and Drivetrain Conference 2015, Hamburg, Oct 2015 - Böhler, P. and Middendorf, P.
Mesoskopisches Drapieren - Simulation und Vailidierung
LBZ-Tagung, Pfinztal, Oct 2015 - Fuhr, J.P. and Middendorf, P.
Validierung der virtuellen Auslegungsprozesskette für schichtbasierte Faserverbundstrukturen
ESI DACH Forum, Bamberg, Oct 2015 - Faerron Guzmán, R., Lott, S., Müller, K. and Cheng, P.W.
Evaluation of the Extreme and Fatigue Load Measurements at Alpha Ventus
RAVE International Conference, Bremerhaven, Oct 2015 - Raach, S., Schlipf, D., Trujillo, J.J., Cheng and P., W
Lidar-based wake tracking for wind farm control at alpha ventus
RAVE Offshore Wind R&D Conference, Bremerhaven, Oct 2015 - Trujillo, J.J., Beck, H., Müller, K., Cheng, P.W. and Kühn, M.
Detailed validation of dynamic loading simulation of offshore wind turbines operating in wake
RAVE Offshore Wind R&D Conference, Bremerhaven, Oct 2015 - Würth, I., Haizmann, F., Anger, J., Schlipf, D., Hofsäß, M., Raach, S. and Cheng, P.W.
Four years of nacelle-based lidar measurements in alpha ventus - a review
RAVE Offshore Wind R&D Conference, Bremerhaven, Oct 2015 - Arnold, M., Biskup, F. and Cheng, P.W.
Impact of Structural Flexibility on Loads on Tidal Current Turbines
11th European Wave and Tidal Energy Conference, Nantes, France, Sep 2015 - Arnold, M., Biskup, F. and Cheng, P.W.
Load Reduction Potential of Variable Speed Control Approaches for Fixed Pitch Tidal Current Turbines
11th European Wave and Tidal Energy Conference, Nantes, France, Sep 2015 - Klett, Y. and Middendorf, P.
Kinematic analysis of congruent multilayer tessellations
ASME International Design Engineering Technical Conferences, Boston, USA, Aug 2015 - Bezerra, R., Wilhelm, F., Strauß, S. and Ahlborn, H.
Manufacturing of Complex Shape Composite Parts through the Combination of Pull-Braiding and Blow Moulding
ICCM20 - 20th International Conference on Composite Materials, Copenhagen, Denmark, Jul 2015 - Fateri, M., Gebhardt, A., Gabrielli, R.A., Herdrich, G., Fasoulas, S., Großmann, A., Schnauffer, P. and Middendorf, P.
Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
30th ISTS, Kobe, USA, Jul 2015 - Fernández, D. and Middendorf, P.
Study of the Influence of UV-Light on CFRP Laminates Stitched with Aramid Thread
ICCE-23, Chengdu, China, Jul 2015 - Gabrielli, R.A., Mathies, J, Großmann, A., Herdrich, G., Fasoulas, S., Schnauffer, P., Middendorf, P., Fateri, M. and Gebhardt, A.
Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith
30th ISTS, Kobe, USA, Jul 2015 - Gabrielli, R.A., Seelmann, J., Großmann, A., Herdrich, G., Fasoulas, S., Schnauffer, P., Middendorf, P., Fateri, M. and Gebhardt, A.
System Architecture of a Lunar Industry Plant Using Regolith
30th ISTS, Kobe, USA, Jul 2015 - Gizik, D., Metzner, C. and Middendorf, P.
First Study on using Heavy Tow Fibers for Textile Preform Processes in the Aerospace Industry
ICCM20 - 20th International Conference on Composite Materials, Copenhagen, Denmark, Jul 2015 - Großmann, A., Gabrielli, R.A., Herdrich, G., Fasoulas, S., Schnauffer, P., Middendorf, P., Fateri, M. and Gebhardt, A.
Overview of the MultiRob 3D Lunar Industrial Development Project
30th ISTS, Kobe, USA, Jul 2015 - Haizmann, F., Schlipf, D., Raach, S., Scholbrock, A., Wright, A., Slinger, C., Medley, J., Harris, M., Bossanyi, E. and Cheng, P.W.
Optimization of a feed-forward controller using a CW-lidar system on the CART3
American Control Conference, Chicago, USA, Jul 2015 - Heieck, F. and Middendorf, P.
Technological approaches on cost reduction challenges for thermoset composites
JEC Americas Conference, Houston, USA, Jul 2015 - Raach, S., Schlipf, D., Trujillo, J.J. and Cheng, P.W.
Model-based wake tracking using lidar measurements for wind farm control
Windfarms 2015 conferences, Leuven, Belgium, Jul 2015 - Sachse, R., Pickett, A.K., Adebahr, W., Klein, M., Käß, M. and Middendorf, P.
Experimental investigation of mechanical fasteners regarding their influence on crack growth in adhesively bonded CFRP-joints subjected to fatigue loading
in 20th Internactional Conference on Composite Materials, Copenhagen, Jul 2015 - Tiana-Alsina, J., Gutierrez, M.A., Würth, I., Puigdefabregas, J. and Rocadenbosch, F.
Motion compensation study for a floating Doppler wind lidar
IGARSS, Milan, Italy, Jul 2015 - Arnold, M., Kretschmer, M., Biskup, F., Koch, J. and Cheng, P.W.
A Validation Method for Fluid-Structure-Interaction Simulations Based on Submerged Free Decay Experiments
25th ISOPE, Kona, USA, Jun 2015 - Beyer, F., Choisnet, T., Kretschmer, M. and Cheng, P.W.
Coupled MBS-CFD Simulation of the IDEOL Floating Offshore Wind Turbine Foundation Compared to Wave Tank Model Test Data
25th ISOPE, Kona, USA, Jun 2015 - Biskup, F., Arnold, M., Daus, P. and Engbroks, L.
Actuator Disc Model of a Tidal In-Stream Energy Converter - Voith HyTide
25th ISOPE, Kona, USA, Jun 2015 - Heieck, F.
Quality Assessment of 2D Braided Composites with Optical Measurement Techniques
18th International Conference on Composite Structures, Lisbon, Portugal, Jun 2015 - Lemmer, F., Raach, S., Schlipf, D. and Cheng, P.W.
Prospects of Linear Model Predictive Control on a 10MW Floating Wind Turbine
Proceedings of the ASME 34th International Conference on Ocean & Offshore and Arctic Engineering, St. Johns, Kanada, Jun 2015 - Beyer, F., Luhmann, B., Raach, S. and Cheng, P.W.
Shadow Effects in an Offshore Wind Farm - Potential of Vortex Methods for Wake Modelling
German Wind Energy Conference (DEWEK), Bremen, May 2015 - Böhler, P., Carosella, S., Götz, C. and Middendorf, P.
Reverse Draping - oder - Woher kommen Fasergerechte Ablagepfade für den TFP-Prozess
Compoform 2015, Munich, May 2015 - Haizmann, F., Schlipf, D. and Cheng, P.W.
Correlation-Model of Rotor-Effective Wind Shears and Wind Speed for LiDAR-based Individual Pitch Control
German Wind Energy Conference (DEWEK), Bremen, May 2015 - Hofsäß, M., Kozlowski, D., Siebers, T. and Cheng, P.W.
Comparison of the Rotor Equivalent Wind Speed of Ground- and Nacelled-Based LIDAR
German Wind Energy Conference (DEWEK), Bremen, May 2015 - Matha, D., Beyer, F., Lemmer, F. and Cheng, P.W.
Model Testing and Numerical Simulation in Floating Offshore Wind Turbine Design - Overview and Conclusions from practical Applications
German Wind Energy Conference (DEWEK), Bremen, May 2015 - Würth, I. and et. al.
Determination of stationary and dynamical power curves in inhomogeneous wind flow using a nacelle-based lidar system
German Wind Energy Conference (DEWEK), Bremen, May 2015 - Blandl, M.
Alternative TowPregs - A further developed impregnation technology for semi-finished fiber products
Hannovermesse 2015, Hannover, Apr 2015 - Beyer, F., Choisnet, T., Favré, M. and Cheng, P.W.
Simplified Aerodynamic Models with Limited Rotor Data for the Design of Floating Offshore Wind Turbine Support Structures
EWEA Offshore, Copenhagen, Denmark, Mar 2015 - Fey, P., Busse, G., Kreutzbruck, M., Michaelis, D. and Middendorf, P.
Non-Destructive Monitoring of Damage in CFRP Laminates using Ultrasonic Birefringence
ANTEC 2015, Orlando, USA, Mar 2015 - Manjock, A., Bredmose, H., Azcona, J., Lemmer, F., Amann, F. and Campagnolo, F.
Rotor Aerodynamics For Tank Tests Of Scaled Floating Wind Turbines
EWEA Offshore, Copenhagen, Denmark, Mar 2015 - Raach, S., Schlipf, D., Haizmann, F., Fürst, F., Würth, I. and Cheng, P.W.
Advances in lidar-assisted control and power curve measurement of wind turbines in the LIDAR II project
EWEA Offshore, Copenhagen, Denmark, Mar 2015 - Reiling, J.M., Middendorf, P. and Sindel, M.
Quality assurance of adhesive processes in the body shop
15thStuttgart International Symposium on Automotive and Engine Technology, Stuttgart, Mar 2015 - Adebahr, W., Rahammer, M., Sachse, R., Gröninger, S., Käß, M., Kreutzbruck, M. and Busse, G.
Crack growth monitoring at CFK adhesive bondings
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Ahlborn, H.
Herstellung komplexer FVK-Bauteile mittels Flechtpultrusion und Blasumformung
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Blandl, M.
Entwicklung eines alternativen Imprägnierverfahrens für Faserhalbzeuge
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Dittmann, J., Neu, A. and Middendorf, P.
Permeabilitätsbestimmung für die optimierte Herstellung von endlosfaserverstärkten Kunststoffen
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Dittmann, J.
Permeabilitätsbestimmung für die optimierte Herstellung von Faser-Kunststoff-Verbunden
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Fey, P., Michaelis, D., Middendorf, P., Busse, G. and Kreutzbruck, M.
Charakterisierung anisotroper Schädigung in CFK mittels Akustischer Doppelbrechung
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Gnädinger, F.
Einfluss der Faserschlichte auf die Faser-Matrix Haftung. Qualitative Untersuchungen für verschiedene Polymerschlichten und -harzsysteme
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Reiling, J.M.
Eigenschaftsprofil von Klebverbindungen im Karosseriebau
24. Stuttgarter Kunststoffkolloquium, Stuttgart, Feb 2015 - Sandner, F., Amann, F., Azcona, J., Munduate, X., Bottasso, C.L., Campagnolo, F., Bredmose, H., Manjock, A., Pereira, R. and Robertson, A.
Model Building and Scaled Testing of 5MW and 10MW Semi-Submersible Floating Wind Turbines
EERA Deepwind, Trondheim, Norway, Feb 2015 - Sandner, F., Yu, W. and Cheng, P.W.
Parameterized Dynamic Modelling Approach for Conceptual Dimensioning of a Floating Wind Turbine System
EERA Deepwind, Trondheim, Norway, Feb 2015 - Schumann, L.
Elektroflug im praktischen Einsatz
e²-Symposium, Stuttgart, Feb 2015 - Fuhr, J.P. and Middendorf, P.
From draping to fracture - Tool chain validation for ply-based composite structures
Composites Virtual Prototyping Expert Seminar, Stuttgart, Jan 2015
2014
- Raach, S., Schlipf, D., Haizmann, F. and Cheng, P.W.
Three Dimensional Dynamic Model Based Wind Field Reconstruction from Lidar Data
Journal of Physics: Conference Series, Copenhagen, Denmark, 2014 - Bischoff, O., Wuerth, I., Cheng, P.W., Alsina, J.T. and Gutierrez, M.
Motion effects on lidar wind measurement data of the EOLOS buoy
RENEW, Lisbon, Portugal, Nov 2014 - Fuhr, J., Böhler, P., Heieck, F., Miene, A. and Middendorf, P.
Optische Preformanalyse zur 3D-Validierung der Drapier- und Flechtsimulation
FCC2014, Augsburg, Nov 2014 - Kärger, L., Böhler, P., Magagnato, D., Galkin, S. and Henning, F.
Virtuelle Prozesskette für Bauteile aus Hochleistungsfaserverbund
FCC2014, Augsburg, Nov 2014 - Beyer, F., Matha, D., Arnold, M., Luhmann, B. and Cheng, P.W.
Coupled CFD and Vortex Methods for Modelling Hydro- and Aerodynamics of Tidal Current Turbines and On- and Offshore Wind Turbines
Simpack User Meeting 2014, Augsburg, Oct 2014 - Fuhr, J.P., Feindler, N. and Middendorf, P.
Virtuelle Bewertung von Drapiereinflüssen auf die Steifigkeit und Festigkeit von schichtbasierten Faserverbundstrukturen
NAFEMS Seminar, Leipzig, Oct 2014 - Kärger, L., Fritz, F., Magagnato, D., Galkin, S., Schön, A., Oeckerath, A., Wolf, K. and Henning, F.
Development Stage and Application of a Virtual Process Chain for RTM Components
Proceedings NAFEMS Seminar Simulation of Composites A Closed Process Chain, Leipzig, Oct 2014 - Geiß, I. and Voit-Nitschmann, R.
Dimensionierung des Energiespeichers hybrider Elektroflugzeuge
Deutscher Luft- und Raumfhartkongress, Augsburg, Sep 2014 - Müller, K., Sandner, F., Bredmose, H., Azcona, J., Manjock, A. and Pereira, R.
Improved Tank Test Procedures For Scaled Floating Offshore Wind Turbines
International Wind Engineering Conference IWEC, Hannover, Sep 2014 - Klett, Y. and Middendorf, P.
Kinematic exploration of 1-DOF origami mechanisms
Proceedings of the the 16th International Conference on Geometry and Graphics, Innsbruck, Austria, Aug 2014 - Arnold, M., Daus, R., Biskup, F. and Cheng, P.W.
Tidal Current Turbine Wake and Park Layout in transient Environments
33rd OMAE, Jul 2014 - Dittmann, J.
Permeability determination of resistive welded carbon fabrics
FPCM, Enschede, Jul 2014 - Heieck, F.
Klein, groß, günstig, schnell - Textilbasierter Faserverbund-Leichtbau für die Serie
Industrial Composites Production Conference (AUTOMATICA), Augsburg, Jul 2014 - Prieß, T. and Middendorf, P.
Thermische Eigenschaften von Kohlenstoffasern im Hochtemperaturbereich
4. CFK-Workshop am Institut für Strahlwerkzeuge (IFSW), Stuttgart, Jul 2014 - Beyer, F., Arnold, M. and Cheng, P.W.
Simulation of Ocean Waves for Load Assessment of Surface Piercing and Fully Submerged Bodies with Ansys CFX
Ansys Conference 32. CADFEM User's Meeting 2014, Nürnberg, Jun 2014 - Middendorf, P.
ARENA2036 - Lightweight design and flexible production for next generation automobiles
ICPC Konferenz, Munich, Jun 2014 - Raach, S., Schlipf, D., Sandner, F., Matha, D. and Cheng, P.W.
Nonlinear Model Predictive Control of Floating Wind Turbines with Individual Pitch Control
American Control Conference, Portland, USA, Jun 2014 - Robertson, A. and al , F.B.e.
Offshore Code Comparison Collaboration Continuation Within IEA Wind Task 30: Phase II Results Regarding a Floating Semisubmersible Wind System
33rd International Conference on Ocean & Offshore and Arctic Engineering (OMAE), San Francisco, USA, Jun 2014 - Sandner, F., Schlipf, D., Matha, D. and Cheng, P.W.
Integrated Optimization of Floating Wind Turbine Systems
33rd International Conference on Ocean & Offshore and Arctic Engineering OMAE, San Francisco, USA, Jun 2014 - Schlipf, D., Grau, P., Raach, S., Duraiski, R., Trierweiler, J. and Cheng, P.W.
Comparison of linear and nonlinear model predictive control of wind turbines using LIDAR
American Control Conference, Portland, USA, Jun 2014 - Carosella, S.
Tailored Fibre Placement - a look on its benchmarks
ICS America, Atlanta, USA, May 2014 - Härtel, F., Böhler, P. and Middendorf, P.
An Integral Mesoscopic Material Characterization Approach
ESAFORM2014, Helsinki, May 2014 - Heieck, F. and Fuhr, J.P.
Wann ist eine Preform 'gut'? Qualitätsbestimmung mit optischer Texturanalyse
1. Technologietag Hybrider Leichtbau, Stuttgart, May 2014 - Molins, C., Campos, A., Sandner, F. and Matha, D.
Monolithic Concrete Off-Shore Floating Structure For Wind Turbines
Proceedings of the EWEA, Barcelona, Spain, May 2014 - Beyer, F. and Cheng, P.W.
Dynamic Behaviour of Floating Offshore Wind Turbines
IEA R&D Wind Task XI, Las Palmas, Spain, Apr 2014 - Böhler, P., Carosella, S., Götz, C. and Middendorf, P.
Path definition for tailored fiber placement structures using numerical reverse draping approach
ESAFORM2015, Graz, Austria, Apr 2014 - Fuhr, J.P., Baumann, J., Härtel, F., Feindler, N. and Middendorf, P.
Effects of in-plane waviness on the properties of carbon composites - experimental and numerical analysis
6th International Conference on Composites Testing and Model Identification, Aalborg, Denmark, Apr 2014 - Haizmann, F., Schlipf, D., Cosack, N., Neuhaus, D., Raach, S., Maul, T. and Cheng, P.W.
Field Testing of LiDAR assisted Feed-Forward Control on a Large Commercial Wind Turbine
EWEA Annual Event, Barcelona, Spain, Mar 2014 - Metzner, C., Gessler, A., Weimer, C., Beier, U. and Middendorf, P.
Performance assessments on unidirectional braided CFRP materials
SEICO14, Paris, France, Mar 2014 - Trujillo, J.J., Seifert, J.K., Kühn, M., Schlipf, D. and Würth, I.
Measuring wind turbine yaw misalignment by near wake tracking
EWEA Annual Event, Barcelona, Spain, Mar 2014 - Böhler, P., Härtel, F. and Middendorf, P.
Mesoskopisches Drapieren: Simulation und Validierung
SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014 - Fuhr, J.P., Feindler, N. and Middendorf, P.
Berücksichtigung von Fertigungseinflüssen in der Strukturauslegung von schichtbasierten Faserverbundwerkstoffen
SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014 - Prieß, T., Onuseit, V., Wiedenmann, M., Freitag, C., Weber, R., Middendorf, P., Graf and T
Produktive Laserbearbeitung von CFK - der Laser als Werkzeug
SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014 - Schumann, L. and Middendorf, P.
FVK in der allgemeinen Luftfahrt - Leichtbau am Beispiel des Elektroflugzeugs e-Genius
SAMPESymposium Deutschland 2014, Stuttgart, Feb 2014 - Schumann, L.
e-Genius auf den Green Speed Cup 2013
IDAFLIEG Wintertreffen, Stuttgart, Jan 2014
2013
- Beilstein, L., Arnold, M. and Rudolph, S.
Methodische Darstellung der Relativität von Optimalbegriffen im Flugzeugvorentwurf am Beispiel von Flugzeugpanels
DLRK, Stuttgart, 2013 - Böhler, P., Michaelis, D., Heieck, F. and Middendorf, P.
Numerical prediction and experimental validation of triaxially braided fibre architecture on curved mandrels
TexComp-11, Leuven, 2013 - Bulat, M., Wascinski, Middendorf, P. and Rödel
Consolidation of braid-based CFRP structures using an expandable mandrel
ICCM, Montreal, 2013 - Draskovic, M., Galappathithi, U., Pickett, A.K., Capellaro, M. and Middendorf, P.
Influence of ply waviness on residual strength and fatigue degradation of composite wind turbine blades
ICCM19, Montreal, 2013 - Galappathithi, U., Pickett, A., Draskovic, M., Capellaro, M. and De Silva. A. K. M.
The Effect of Ply Waviness for the Fatigue Life of Composite Wind Turbine Blades
ICREPQ 13 (RE&PQJ), Bilbao, 2013 - Gnaedinger, F., Middendorf, P., Karcher, Chaudhari and Henning, F.
Realisierung und Potential von Hohlstrukturbauteilen mit Hinterschnitt im RTM-Verfahren für die automobile Großserie
19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 2013 - Gnaedinger, F., Middendorf, P., Karcher and Henning, F.
Holistic Design Process for Hollow Structures based on Braided Textiles and RTM
ICCST-9, Sorrento, 2013 - Härer, A, Matha, D., Kucher, D and Sandner, F.
Optimization of offshore wind turbine components in multi-body simulations for cost and load reduction
EWEA Offshore, Frankfurt, 2013 - Härtel, F., Böhler, P. and Middendorf, P.
Identification of forming limits for unidirectional carbon textiles in reality and mesoscopic simulation
ESAForm, Aveiro, 2013 - Härtel, F. and Middendorf, P.
Process parameter studies and comparison of different preform processes with NCF material
ICCM 19, Montreal, 2013 - Kärger, L., Schön, A., Fritz, F., Böhler, P., Maganato, D., Fischer, S. and Henning, F.
Virtual Process Chain for an integrated assessment of high-performance composite structures
NAFEMS World Congress, Salzburg, Austria, 2013 - Kilchert, May, Gnaedinger, F., Karcher and Schoepfer
Einfluss des Flechtwinkels auf die Werkstoffeigenschaften von Tri-Axialen Geflechten
19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Karlsruhe, 2013 - Pickett, A.K., Sirtautas, J. and Masseria
Challenges of VARI process simulation: materials testing and simulation approaches
CCeV, Augsburg, 2013 - Pickett, A.K., Sirtautas, J. and Masseria
Process and challenges for resin infusion simulation of large structural composite parts
CCeV, Stuttgart, 2013 - Pickett, A.K., Sirtautas, J. and Masseria
Resin infusion simulation for large structural composite parts
TexComp-11, Leuven, 2013 - Sandner, F. and Cheng, P.W.
Conceptual design of floating wind turbines
In Proceedings of the 9th PhD Seminar on Wind Energy in Europe, Visby, 2013 - Schlipf, D., Fleming, Kapp, Scholbrock, Haizmann, Belen, Wright and Cheng, P.W.
Direct Speed Control Using LIDAR and Turbine Data
American Control Conference, Washington, 2013 - Schlipf, D.
Lidars and Wind Turbine Control - Part 1 (Chapter 9 in Remote Sensing for Wind Energy)
DTU Wind Energy-E-Report-0029(EN), Roskilde, 2013 - Scholbrock, Fleming, Fingersh, Wright, Schlipf, D., Haizmann and Belen
Field Testing LIDAR-Based Feed-Forward Controls on the NREL Controls Advanced Research Turbine
51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Grapevine, 2013 - Sirtautas, J. and Pickett, A.K.
Fabric permeability testing and their use in infusion simulation
CompTest, Aalborg, 2013 - Middendorf, P. and Drechsler, K.
Networks and Private Public Partnerships for R&D on Automotive Composites
IQPC Automotive Composites, Köln, Dec 2013 - Böhler, P., Härtel, F., Pickett, A.K. and Middendorf, P.
Mesoskopischer Ansatz für die Drapiersimulation von unidirektionalen vernähten Textilien
ESI DACH Forum, Wiesbaden, Nov 2013 - Böhler, P., Härtel, F. and Middendorf, P.
Drapieren: Simulation und Verifikation
CCeV, Meitingen, Oct 2013 - Middendorf, P.
Manufacturing technologies for load-path oriented design: An overview
JEC Americas, Boston, USA, Oct 2013 - Arnold, M., Biskup, F., Matha, D. and Cheng, P.W.
Simulation of Rotor-Foundation-Interaction on Tidal Current Turbines with Computational Fluid Dynamics
10th EWTEC, Sep 2013 - Biskup, F., Arnold, M., Daus, P., Arlitt, R. and Hohberg, M.
Effects of Rotor Blade Tip Modifications on a Tidal In-Stream Energy Converter - Voith HyTide
10th EWTEC, Sep 2013 - Haizmann, F. and Cheng, P.W.
Advanced Lidar-Assisted Control of Wind Turbines
9th EAWE PhD Seminar on Wind Energy in Europe, Visby, Sep 2013 - Klett, Y.
Realtime rigid folding algorithm for quadrilateral- based 1-DOF tessellations
ASME International Design Engineering Technical Conferences, Portland, USA, Aug 2013 - Bender, B., Middendorf, P., Ehard and Milosev
Stoffschlüssiges Fügen von Aluminium und CFK durch die Epoxidharz-Matrix für die Herstellung hybrider Strukturbauteile
19. Symposium Verbundwerkstoffe und Werkstoffverbund, Karlsruhe, Jul 2013 - Kärger, L., Magagnato, D., Schön, A., Böhler, P., Fischer, S., Fritz, F. and Henning, F.
Aufbau einer durchgängigen CAE-Kette durch Verknüpfung von Drapier-, Formfüll- und Struktursimulation zur ganzheitlichen Bewertung von Bauteilen aus Hochleistungsfaserverbunden
DGM Tagung Verbundwerkstoffe / Werkstoffverbunde 2013, Karlsruhe, Jul 2013 - Markus, D., Wüchner, R., Arnold, M., Bletzinger, K.U. and Hojjat, M.
A reduced modeling Methodology for efficient Ocean Wave CFD Simulation of fully submerged Structures
32nd OMAE, Jul 2013 - Prieß, T. and Middendorf, P.
Gemeinsamkeiten von lasergeschnittenen Kohlenstofffasern und Wattestäbchen
3. CFK-Workshop am Institut für Strahlwerkzeuge, Stuttgart, Jul 2013 - Schlipf, D., Sandner, F., Raach, S., Matha, D. and Cheng, P.W.
Nonlinear Model Predictive Control of Floating Wind Turbines
ISOPE, Anchorage, USA, Jul 2013 - Arnold, M., Biskup, F. and Cheng, P.W.
Simulation of Fluid-Structure-Interaction on Tidal Current Turbines based on coupled Multibody and CFD Methods
23rd ISOPE, Jun 2013 - Arnold, M. and Cheng, P.W.
Simulation of Fluid-Structure-Interaction on Tidal Current Turbines with flexible Multibody Systems and Ansys CFX
31st ACUM, Jun 2013 - Beyer, F., Arnold, M. and Cheng, P.W.
Analysis of Floating Offshore Wind Turbine Hydrodynamics using coupled CFD and Multibody Methods
23rd International Ocean and Polar Engineering Conference (ISOPE), Anchorage, USA, Jun 2013 - Middendorf, P. and Popp
Advances in Composite Repair
JEC Asia, Singapore, Jun 2013 - Weber and Middendorf, P.
Semi-analytical skin buckling of curved orthotropic grid-stiffened shells
Proceedings of ICCS17, Porto, Portogal, Jun 2013 - Carosella, S.
Lastpfadgerechte Auslegung und Fertigungsverfahren für Faserkunststoffverbunde
Sika-Technologieforum, Ingolstadt, May 2013 - Schumann, L.
Electric Aircraft research - two years of flying e-Genius
Electric aircraft symposium, Santa Rosa CA, May 2013 - Carosella, S. and Middendorf, P.
Der Weg zum FVK mit Hilfe direkter Preformverfahren
23. Stuttgarter Kunststoff-Kolloquium, Stuttgart, Mar 2013 - Heieck, F.
Entwicklung eines Handhabungsgerätes in Faserverbundbauweise
2. Augsburger Technologietransfer-Kongress, Augsburg, Mar 2013 - Middendorf, P.
Potenzial und Einsatzgebiete von FKV für Leichtbauanwendungen
23. Stuttgarter Kunststoff Kolloquium, Stuttgart, Mar 2013 - Haizmann, F., Fleming, P., Schlipf, D., Scholbrock, A., Hofsäß, M., Wright, A. and Cheng, P.W.
Implementation of an Online Correlation Analysis for an Adaptive LiDAR based Feed-Forward Controller for Wind Turbines
EWEA Annual Event, Vienna, Feb 2013 - Schumann, L.
Flugleistungsvermessung des e-Genius
IDAFLIEG Wintertreffen, Hannover, Jan 2013 - Schumann, L.
Massenreduktion durch Weglassen - Theoretische Baukonzeptuntersuchung
IDAFLIEG Wintertreffen, Hannover, Jan 2013
2012
- Baumann, Härtel, Middendorf, Milwich, Müller and Planck
Experimental Draping Studies Based on Standard Textile Testing
Annual World Conference on Carbon 2012, Krakow, 2012 - Birkefeld and Middendorf
Optimization of Braided Structures With a Genetic Algorithm Considering Production Aspects
SETEC 12, Lucerne, 2012 - Birkefeld, Reden and Middendorf
Material Quality of Braided Fuselage Profiles
AIAA SDM Conference, Honolulu, 2012 - Birkefeld
Analysis and Process Simulation of braided structures
EUCOMAS, Zürich, 2012 - Böhler, Bouc, Ahlborn and Middendorf
Innovative joining of aircraft profiles with braided holes
ECCM 15, Venedig, 2012 - Breede, Frieß, Jemmali, Koch, Voggenreiter and Frenzel
Mechanical and microstructural characterization of C/C-SIC manufactured via triaxial and biaxial braided fiber preforms
International conference and Expo on advanced ceramics and composites, Daytona Beach, 2012 - Bulat, Kehrle, Drechsler and Bommes
Effects of pressurized cores on the properties of braided CFRP structures
SAMPE EUROPE 33rd, Paris, 2012 - Dolezal, Kittmann, Senner and Claupein
Collecting geo-referenced data for agricultural purposes with an UAS
3rd International Conference on Machine Control & Guidance, Stuttgart, 2012 - Dransfeld, Siegfried, Birkefeld and Reden
FX-CORE: Functional braiding mandrel for the compression resin transfer moulding of profiles
SAMPE EUROPE 33rd, Paris, 2012 - Dransfeld, Siegfried, Birkefeld and Reden
FX-Core: Functional braiding mandrel for the fast impregnation of hollow profiles
SAMPE Europe Conference SEICO, Paris, 2012 - Erber and Drechsler
Damage Tolerant Drive Shafts with Integrated CFRP Flanges
SAMPE, Seattle, 2012 - Gnädinger, Härtel, Middendorf, Kuhlmann and Bauernhansl
Design of multifunctional automotive structures using braiding technology
Annual World Conference on Carbon, Krakow, 2012 - Hafner, Weber, Graf and Middendorf
Influence of laser processing on carbon fibres
Laser Technology (SLT) Forum, Stuttgart, 2012 - Härtel and Middendorf
A multi-functional Test Rig
Aachen Dresdner Textiltagung, Dresden, 2012 - Härtel, Wagner, Middendorf and Fleischer
Draping Strategies and Automation solutions for complex CFRP-Components
SETEC, Lucerne, 2012 - Liebau, van Campen, Sommer-Dittrich and Middendorf
User- and Process-Defined Benchmark of Kinematic and FE-Draping Codes and Integration into the CAx Process Chain
NAFEMS European Conference Multiphysics Simulation, Frankfurt, 2012 - Middendorf, Erber and Carosella
Flechttechnologie für composite Leichtbaustrukturen: auf dem Weg zur Serienfertigung
Fertigungstechnisches Kolloquium, Stuttgart, 2012 - Reden, Birkefeld, Vigoureux, Blanchard, Henke and Baumgart
Development of an UD-Braided Longeron With Variable Cross Sections
SAMPE EUROPE 33rd, Paris, 2012 - Schumann, L.
Flight Testing of the e-Genius aircraft
Airbus e-Genius Day, Toulouse, 2012 - Erber, Middendorf and Drechsler
Automated Process Chains for Carbon Composites
JEC Americas, Boston, Nov 2012 - Schlipf, D., Rettenmeier, A., Haizmann, F., Hofsäß, M., Courtney, M. and Cheng, P.W.
Model Based Wind Vector Field Reconstruction from Lidar Data
German Wind Energy Conference (DEWEK), Bremen, Nov 2012 - Würth, Rettenmeier, Schlipf, Cheng, Wächter, Rinn and Peinke
Determination of Stationary and Dynamical Power Curves Using a Nacelle-based LIDAR System
German Wind Energy Conference (DEWEK), Bremen, Nov 2012 - Liebau, van Campen, Sommer-Dittrich and Middendorf
On the Effect of Draping Strategy on FE-Based Draping Simulation of Basic and Complex 3D Geometries for Automated Preforming
3rd Aircraft Structural Design Conference, Delft, Oct 2012 - Sandner, Schlipf, Matha, Seifried, R and Cheng, P.W.
Reduced Nonlinear Model of a Spar-Mounted Floating Wind Turbine
German Wind Energy Conference DEWEK. Bremen, Germany, Oct 2012 - Arnold and Cheng
Fluid-Structure-Interaction on Tidal Current Turbines
8th EAWE-PhD-Summerschool, Sep 2012 - BeyerandCheng
Dynamic Behaviour of Floating Offshore Wind Turbines
8th PhD Seminar on Wind Energy in Europe, Zurich, Sep 2012 - Liebau, van Campen, Sommer-Dittrich, Dölle and Middendorf
An Approach for Investigating the complexity of an Automated Draping Process Using the Finite-Element Method
European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Wien, Sep 2012 - Matha, Sandner and Schlipf
Efficient Critical Design Load Case Identification for Floating Offshore Wind Turbines with a Reduced Nonlinear Model
The Science of Making Torque from Wind. Oldenburg, Sep 2012 - Middendorf
Research: Technology Trends in Composite Simulation
Composite Technologies Symposium, Singapore, Sep 2012 - Klett
Isometrically folded structures in near net shape core applications
ICSS10 - International Conference on Sandwich Structure, s, Aug 2012 - Carosella
Textile Preforming and its potential for automatisation
IQPC Composite Manufacturing, Frankfurt, Jul 2012 - Prieß and Middendorf
Einfluss des Laserprozesses auf die Faser-Matrix-Anbindung beim Schneiden von Kohlenstofffasern
2. CFK-Workshop am Institut für Strahlwerkzeuge, Stuttgart, Jul 2012 - Middendorf, Jäger and Prowe
Damage Tolerance of CFRP Airframe Structures: Criteria and Concepts
DLR Bauweisen Kolloquium, Stuttgart, Jun 2012 - Prieß, Hafner, Weber, Graf and Middendorf
Influence of laser processing on carbon fibres
Stuttgart Laser Technology (SLT) Forum, Stuttgart, June 2012 - Rettenmeier, Anger, Bischoff, Hofsäß, Schlipf and Würth
Nacelle-Based Lidar Systems
Summer School:Remote Sensing for Wind Energy, Jun 2012 - Carosella
Tailored Fibre Placement - an option for automated high volume Preform Production
Sampe Conference SEMAT, Munich, May 2012 - Rettenmeier, Anger, Bischoff, Hofsäß, Schlipf, Würth and Cheng
Development of Lidar wind measurement techniques
RAVE International Conference, Bremerhaven, May 2012 - Schlipf, Anger, Bischoff, Hofsäß, Rettenmeier, Würth, Siegmeier and Cheng
Lidar Assisted Wind Turbine Control
RAVE International Conference, Bremerhaven, May 2012 - Carosella and Hoffmann
Tailored Fibre Placement - Fasern strukturgerecht ablegen
13. Textiltechnik Tagung, Chemnitz, Mar 2012 - Carosella
Tailored Fibre Placement - Merging stitching and fibre placement technologies
ICS Europe, Paris, Mar 2012 - Middendorf and Birkefeld
Entwicklungstrends in der Faserverbund-Simulation
Fachkongress Composite Simulation, Fellbach, Feb 2012 - Beyer, Matha, Sebastian and Lackner
Development, Validation and Application of a Curved Vortex Filament Model for Free Vortex Wake Analysis of Floating Offshore Wind Turbines
50th AIAA Aerospace Sciences Meeting and Exhibit, USA, Jan 2012 - Carosella and Hoffmann
Das Tailored Fibre Placement Verfahren im Fokus des konstruktiven Leichtbaus
automobil bw: TecNet Gruppe Leichtbau, Esslingen, Jan 2012
2011
- Bender, Fischer and Drechsler
Optimizing a Foldcore concerning density specific stiffness properties
SEICO, Paris, 2011 - Drechsler
Automatisierte textile Vorformlingtechnologie
Cluster-Treff, Industrielle Prozesskette Hochdruck-RTM bei der KraussMaffei Technologies GmbH, 2011 - Erber
Cost Efficient Manufacturing Process of CFRP Truck Side Member
SAMPE EUROPE 32nd International Technical Conference, Paris, 2011 - Feindler, Döll and Drechsler
CFK in automobilen Crashstrukturen: Anforderungen, Dimensionierung und Simulation
ATZlive, Werkstoffe im Automobilbau, 2011 - Feindler, Drechsler and Döll
Test method to analyse the energy absorption of composite material using flat coupon testing
5th International Conference on Composites Testing and Model Simulation, Lausanne, 2011 - Feindler, N., Fuhr, J., Böhler, P., Drechsler, K. and Döll, J.
Simulation und Dimensionierung von energieabsorbierenden Faserverbundstrukturen für automobile Anwendungen
NWC11 NAFEMS 2011, 2011 - Fischer and Drechsler
Aluminium Faltkerne für den Einsatz in Sandwichstrukturen
Landshuter Leichtbau-Colloquium, Landshut, 2011 - Kaiser, Weimer and Drechsler
Automated impregnation of preforms for cost-effective manufacturing of fibre reinforced plastics
CFK-Convention, Stade, 2011 - Kittmann, Breeman and Schmollgruber
The NACRE Innovative Evaluation Platform and its Navigation - Control Strategies
SAE 2011 AeroTech Congress, Toulouse, 2011 - Leutza, Kluepfelb, Dumontb, Hinterhoelzla, Drechsler and Weimer
FE-Simulation of the Diaphragm Draping Process for NCF on a Macro-Scale Level
14th International ESAFORM Conference on Material Forming ESAFORM, Belfast, 2011 - Mildner, Dölle, Drechsler and Bjekovic
Influence of reinforced metal structures using fibre reinforced plastics
SAMPE EUROPE 32nd International Technical Conference, Paris, 2011 - Nogueira, Drechsler, Hombergsmeier and Pacchione
Investigation of a hybrid 3d-reinforced joining technology for lightweight structures
16th International Conference on Composite Structures (ICCS 16), Porto, 2011 - Nogueira, Drechsler, Hombergsmeier and Pacchione
Investigation of the properties and failure mechanismus of a damage tolerant 3d-reinforced joint for lightweight structures
Sampe Setec 11, Leiden, 2011 - Pickett and Birkefeld
Analysis and process simulation of textile structures
SAMPE Technical Conference, Zürich, 2011 - Seeger, Reese, Jonke, Englhart and Drechsler
Cost effective manufacturing of molds for CFRP component production
International Thermal Spray Conference (ITSC), Hamburg, 2011 - Werchner, Havar and Drechsler
Influence of design and loading on the mechanical behaviour of thick composite lugs
DGLR Kongress, Bremen, 2011 - Beyer, Sebastian, Matha and Lackner
Curved Vortex Filaments in Free Vortex Wake Analysis of Floating Wind Turbines
EWEA Offshore 2011, Niederlande, Nov 2011 - Carosella, Birkefeld and Reden
Entwicklung bis zur Serienumsetzung eines Handhabungsgerätes in Faserverbundbauweise
Materialica Kongress, München, Oct 2011 - Carosella
Grundlagen der CFK-Herstellung
1. Fachtagung CFK Bearbeitung, Stuttgart, Oct 2011 - Prieß
Injektions- und Infiltrationstechnologien für Faserverbundstrukturen
1. CFK-Workshop am Institut für Strahlwerkzeuge (IFSW), Stuttgart, Sep 2011
2010
- Beilstein, Drechsler and Rudolph
Gewichtsabschätzungen von geklebten und geschweißten Strukturverbindungen im Flugzeugvorentwurf
DLRK, Hamburg, 2010 - Birkefeld, Erber and Drechsler
Virtual Design Process for Braided Drive Shafts
SAMPE SEICO Conference, Paris, 2010 - Birkefeld, Pickett, Witzel and Drechsler
Procedures for optimisation of structural composite aircraft profiles considering manufacturing constraints
3rd EUCOMAS, Berlin, 2010 - Clairmont, Drechsler, Erber and Härtel
Automated handling of dry carbon and prepreg materials for the serial production for aeronautical and automotive applications
SAMPE Europe SEMAT, München, 2010 - Drechsler and Klett
Technical Tessellations - Hidden Beauties
5OSME Conference, Singapore, 2010 - Drechsler
Carbon Composites in Süddeutschland - Eine Region entwickelt sich zum europäischen High-tech-Standort
9. Innovation Panel, Meitingen, 2010 - Drechsler
CFK - der Automobilwerkstoff der Zukunft?
Internationaler VDI-Kongress Kunststoffe im Automobilbau, Stuttgart, 2010 - Drechsler
Funktionsintegrierter Leichtbau
9. Symposium Material Innovativ, Augsburg, 2010 - Drechsler
Was kann man von anderen Märkten lernen?
CCeV Automotive Forum, Nackarsulm, 2010 - Erber, Bulat, Köber, Ménager and Drechsler
Development and Test of CFRP Secondary Structures Manufactured by Innovative Textile Preforming Technologies
31. SAMPE Europe Conference, Paris, 2010 - Erber, Weng and Drechsler
Effect of Designed Yarn Damages on the Out-of-Plane Properties of Braided Composite Parts
10 TexComp Conference, 2010 - Goraj, Kittmann, Voit-Nitschmann and Szender
Design and integration of Flexi Bird - a low cost sub scale research aircraft for safety and environmental issues
27th International congress of the aeronautical sciences, Nice, 2010 - Goraj, Kittmann, Voit-Nitschmann and Szender
Design and integration of Flexi-bird- a low cost sub-scale research aircraft for safety and environmental issues
ICAS, Cancún, 2010 - Grzeschik and Drechsler
Experimental studies on folded cores
9th International Conference on Sandwich Structures, Los Angeles, 2010 - Härtel, Erber and Drechsler
Development and Testing of a Lightweight CFRP Ka-Band Antenna for Space Applications
SAMPE, Paris, 2010 - Härtel, Erber, Drechsler, Lengowski, Beyermann and Röser
Development and testing of a lightweight CFRP KA-Band antenna for space applications
JEC, Paris, 2010 - Kehrle
Forschung und Entwicklung von Faserverbund- und Sandwichleichtbau im Flugzeug- und Automobilbau
VDI Stuttgart, Germany., 2010 - Kehrle
Leichtbauplatten mit Foldcore Kernen
Möbelleichtbau-Symposium, Lemgo, 2010 - Kehrle
Leichtbausandwichwerkstoffe
Yachtbau Symposium, Hamburg, 2010 - Reden, Becker and Drechsler
Design and Energy Transmission for an Electronic Controlled Lace Bobbin
SETEC 10, Brindisi, 2010 - Reden, Bulat and Drechsler
Mechanical Performance of Hybrid Carbon Glass Fibre Braids with a High Ratio of 0°-Fibres
10 TexComp Conference, 2010 - Rudolph, Fuhr and Beilstein
A validation method using design languages for weight approximation formulae in the early aircraft design phase
EUCOMAS, Mannheim, 2010 - Werchner, Havar and Drechsler
Design Guidelines and Analysis Methods for Composite Load Introduction Structures
Simulia Konferenz, Heidelberg, 2010 - Carosella
Tailored Fibre Placement - Über- und Ausblick auf eine prosperierende Textiltechnologie
Fachtagung Technisches Sticken- zwischen Forschung und Markt, Plauen, Sep 2010
2009
- Drechsler
Leichtbaupotential von Faserverbundwerkstoffen im Maschinenbau
IHK Innovationspodium, Augsburg, 2009 - Erber, Beyersdorff and Drechsler
Neue Gesamtkonzepte und Fertigungstechnologien für FVK-Druckwalzen
Composites in Automotive and Aerospace Kongress, Materialica, 2009 - Erber, Birkefeld and Drechsler
The Influence of Braiding Configuration on Damage Tolerance of Drive Shafts. 30
SAMPE Europe Conference, Paris, 2009 - Erber, Gittel, Geiger, Chaudhari, Henning and Drechsler
Advanced Damage Tolerance of CFRP Laminates using In-Situ Polymerised Thermoplastics
SAMPE Europe Technical Conference, Filton, 2009 - Fischer, Grzeschik and Drechsler
Experimental and numerical parameter study of foldcores
Vortrag auf der Sampe Europe Technical Conference, Bristol, 2009 - Fischer, Grzeschik and Drechsler
Potential of high performance foldcores made out of Peek
SETEC Europe, Bristol, 2009 - George, Drechlser and Holmberg
The Permeability of Carbon Fiber Preforming Materials: Sensitivity to Fabric Geometry
20th Annual International SICOMP Conference, Piteå, 2009 - George, Drechlser and Holmberg
The Permeability of Tackified, Stitched, and Braided Carbon Fiber Textiles: Experi-mental Characterization and Design Modeling
SAMPE, Baltimore, 2009 - Grave, Birkefeld, Reden, Drechsler, Kyosev and Rathjens
Simulation of 3D overbraiding - Solutions and Challenges
Second World Conference on 3D Fabrics and their Applications, Greenville, 2009 - Johnson, Kilchert, Fischer and Kehrle
New structural composite core materials
Composites, Gold Coast, 2009 - Kehrle
Chancen durch Faserverbundwersktoffe im Anlagenbau - Potenziale und Risiken
CCe.V. Augsburg, Germany., 2009 - Kehrle
Faserverbundwerkstoffe
IHK, Reutlingen, 2009 - Kehrle
Sandwichbauweisen in der Luftfahrt
Leichtbaukolloquium, Landshut, 2009 - Klett and Drechsler
Cutting edge cores: Multi- functional Core Structures
DGLR Jahrestagung, 2009 - Klett, Drechsler, Kehrle and Fach
Cutting Edge Cores: Multifunktionale Faltkernstrukturen
4. Landshuter Leichtbau-Colloquium, Landshut, 2009
2008
- Bulat
Textile technology as an innovative manufacturing method for highperformance fibre composite structures
4th International Textile, Dubrovnik, 2008 - Carosella
Sticken ein textiles Preformverfahren
2. CFK Technologietag Airbus, Hamburg, 2008 - Carosella
The Forefront of Textile Composite Research in Europe
Aerospace Industrial Technology Show, Nagoya, 2008 - Erber
Flechttechnologie - Kostenoptimiertes Fertigungsverfahren für Faserverbundbauteile
CFK-Technologietag, Hamburg, 2008 - Fischer and Drechsler
Aluminium foldcores for sandwich structure application
CompTest, 2008 - Fischer and Drechsler
Aluminium Foldcores for Sandwich Structure Application. Cellular Metals for Structural and Functional Applications
CELLMET, 2008 - Fischer, Drechsler, Kilchert and Johnson
Mechanical tests for foldcore base material properties
CompTest, 2008 - Klett and Drechsler
Cutting edge cores: Aerospace and origami
9th International Mathematica Symposium, Maastricht, 2008 - Klett and Drechsler
Cutting-Edge Cores - Origami Meets Aerospace
International Mathematica User Conference, Champaign, 2008 - Kunze, Wellhausen, Leistner, Demel, Roser and Drechsler
Entwicklung von Faserverbund-Hohlbauteilen in RTM-Bauweise am Beispiel eines Traglenkers von Passagierflugzeugtüren
Proc. Deutscher Luft- und Raumfahrtkongress, Darmstadt, 2008 - Trittler, Fichter, Voit-Nitschmann and Kittmann
Preliminary System Identification of the Blended Wing Body Flight Demonstrator VELA2 from Flight Data
AIAA Atmospheric Flight Mechanics Conference, Honolulu, 2008 - Wagner, Bansemir and Drechsler
Verhalten unterschiedlicher FVW-Bauweisen und Fertigungstechniken unter Schlagbelastung
Deutscher Luft- und Raumfahrtkongress, Darmstadt, 2008
2007
- Beilstein and Drechsler
A methodology of weight prediction for joints in aircraft design
SAWE, Madrid, 2007 - Breckweg, Meyer, Drechsler and Rüger
Fast and Intuitive Robot Programming for Mandrel Guiding of Braiding Machines for Textile Preforming
International European SAMPE Conference, Paris, 2007 - Drechsler and Friedrich
Wege zur kostengünstigen Fertigung von Hochleistungsverbundstrukturen in innovativen Fahrzeugkonzepten
Handelsblattsymposium Werkstoffe und Fertigungstechnik, Technologien und Bauweisen, Stuttgart, 2007 - Kaiser, Garschke, Fox, Weimer and Drechsler
Out of Autoclave Manufacture of Structural Aerospace Composite Materials
International European SAMPE Conference, Paris, 2007 - Klett, Y. and Drechsler, K.
Design of Multifunctional Folded Core Structures for Aerospace Sandwich Applications
1st CEAS European Air and Space Conference, 2007 - Klett, Kehrle, Drechsler and Carosella
High Tech Origami
Composite Days, Innsbruck, 2007 - Kümpers, Brockmanns, Drechsler and Rüger
Cost Effective Manufacturing of complex textile preforms by automated braiding technologies
International European SAMPE Conference, Paris, 2007 - Moncayo, Wagner and Drechsler
Numerical Simulation of Low Velocity Impact Delamination in Composite Materials
CanCom, Montreal, 2007 - Stüve, Gries, Drechsler, Witzel, Miravete and Tolosana
Simulation of braiding technology along the complete process chain
International European SAMPE Conference, Paris, 2007 - Voit-Nitschmann, Schumann and Geinitz
HYDROGENIUS: FLYING WITH HYDROGEN
Workshop of Aircraft System Technologies AST 2007, Hamburg., 2007 - Wagner, Bansemir, Drechsler and Weimer
Impact Behaviour and Residual Strength of Carbon Fiber Textile based Materials
3rd SAMPE Europe Technical Conference, Madrid, 2007
2006
- Aoki, Kensche, Eberle, Wagner, Keilig and Drechsler
NDE Assessment of Long Fibre Reinforced GFRP and CFRP
Conference on Damage and its evolution in fibre composite materials, Stuttgart, 2006 - Drechsler, Herkt, Less and Riedel
Dynamic testing of 3D-reinforced composite T-joints
ICAS, Hamburg, 2006 - Drechsler, Herkt, Middendorf, Less and Riedel
3D-reinforcement of composite T-joints by means of robot assisted stitching technologies
SAMPE International, Long Beach, 2006 - Drechsler and Karb
Design and Performance of Composite Structures made by Tailored Fibre Placement Technology
SAMPE International Conference, Long Beach, 2006 - Drechsler, Kehrle and Kolax
Folded Core Sandwich Structures for advanced next generation fuselage concepts
SAMPE Europe Technical Conference, Toulouse, 2006 - Drechsler, K., Kehrle, R, Klett, Y., Thorsteinsson and E
Faltwabenkerne für multifunktionale Leichtbaustrukturen
2nd MATERIALICA Composites Congress Composites in Automotive Aerospace, München, 2006 - Drechsler, Schouten and Havar
3D reinforcement improving interlaminar shear and peel strength for composites loops
International European SAMPE Conference, Paris, 2006 - Drechsler and Wagner
Fatigue Behavior and Residual Strength of Textile Based Materials
Conference on Damage and its evolution in fibre composite materials, Stuttgart, 2006 - Drechsler
Chancen für CFK im Automobil- und Flugzeugbau durch integrierte Fertigungstechnik
Bayern Innovativ Symposium Polymere im Automobilbau, München, 2006 - Drechsler
Leichtbau in Natur und Technik
HIN Kolloquium, Neckarsulm, 2006 - Drechsler
Origami-like Sandwich Structures for Aerospace Applications
SAMPE International Conference, Long Beach, 2006 - Feher, Drechsler and Filsinger
Development of a Modular 2,45 GHz HEPHAISTOS-CA2 Microwave Processing System for Automated Composites Fabrication
International European SAMPE Conference, Paris, 2006 - Palacin and Drechsler
The Marie Curie Program Momentum - Composites in Transport
International European SAMPE Conference, Paris, 2006 - Pfleiderer, Wagner, Drechsler and Busse
Application and potential of emerging NDE-methods for carbon fibre reinforced composites
Proceedings 27th Sampe Europe Conference, Paris, 2006 - Weis, Hoflin, Deimel, Bilgram and Drechsler
Damage Detection Using Fibre Bragg Grating Sensors
Proceedings of the European Conference on Non Destructive Testing, Berlin, 2006
2005
- Drechsler and Gessler
Textile Fertigungsverfahren für optimierte Faserverbundstrukturen
WING-Konferenz, Aachen, 2005 - Drechsler and Keilig
Schädigungscharakterisierung an NCF-Laminaten mittels Lockin-Thermographie und Bestimmung der CAI-Restfestigkeiten
1.Kunststoffkolloqium, Stuttgart, 2005 - Drechsler
Leichtbau im Fahrzeug
Euroforum-Konferenz, München, 2005 - Drechsler
Neueste Entwicklungen der Faserverbundtechnologie für den Flugzeug- und Automobilbau
Vortrag VDI Arbeitskreis Produktionstechnik, Stuttgart, 2005 - Drechsler
Origami and aerospace - a new approach for sandwich structures
Keynote presentation at International SAMPE Conference, Tokyo, 2005 - Havar and Drechsler
3D Fibre Reinforcement improving interlaminar shear and peel strength of composite loops
SAMPE, Paris, 2005 - Kehrle and Drechsler
Manufacturing and performance of folded honeycomb structures
SAMPE, Long Beach, 2005 - Kehrle and Drechsler
Manufacturing, Simulation and performance of sandwich structures with folded core
25th International SAMPE Conference, Paris, 2005 - Kehrle and Pfaff
Mechanische Eigenschaften neuartiger Sandwichkerne
6. Nationales Symposium SAMPE, Stuttgart, 2005